Abstract:Copper-based catalysts deposited on foams were developed to perform the water gas shift reaction at low temperature (150–300 °C) at the outlet of a biomass gasifier with limited pressure drop. Different synthesis methods were used such as wet impregnation and urea-nitrates combustion methods for the preparation of copper/ceria/foam catalysts containing 4.5–7.0 wt % of copper as the active phase and 7.0–9.0 wt % of ceria as the wash coat. The latter were characterized in order to evaluate present phases, their crystallite size, and ceria lattice parameter by X-ray diffraction (XRD) analysis, specific surface area by N2 adsorption technique (BET method), and reducibility by temperature programed reduction (TPR). The activity of the catalysts was studied in the water gas shift reaction at low temperature (150–300 °C) and at a high gas hourly space velocity (between 3600 and 9500 h–1) as a function of preparation parameters (synthesis method and catalyst composition) and operating parameters (temperature and prereduction step). It appeared that the wet impregnation method is the optimized studied method because it led to similar activity to those obtained with a more complex synthesis method (urea-nitrate combustion). The optimized copper and ceria contents are 5.5 and 9.0 wt %, respectively, 30 ppi foam. The study of the temperature effect highlighted the optimum at 300 °C without the sintering of metallic copper nor ceria crystallites. Catalytic tests showed in situ activation of the catalyst at 300 °C. So, the prereduction step was unnecessary at this temperature. Finally, the more promising catalyst (5.5 wt % of Cu and 9.0 wt % of CeO2) was tested at the outlet of a high temperature water gas shift reactor, and the conditions of the two coupled reactors (high and low reaction temperatures and steam to carbon (S/C) molar ratio) were optimized permitting the reaching of thermodynamic values for methane conversion with 500 °C in the high temperature reactor and 350 °C and a S/C of 3 in the low temperature reactor.

Influence of copper loadings on the performance of Cu/CeO_2 catalysts for water-gas shift reaction

Very high loading oxidized copper supported on ceria to catalyze the water-gas shift reaction

Dispersion of copper on ceria for the low-temperature water-gas shift reaction

High efficient CuCeO2‐δ/SiO2 catalyst for RWGS reaction: impact of Ce content and loading sequence

Cu/CeO2 catalysts for reverse water gas shift reactions: the effect of the preparation method

Transition-Metal-Doped CeO2 for the Reverse Water-Gas Shift Reaction: An Experimental and Theoretical Study on CO2 Adsorption and Surface Vacancy Effects

Reverse Water–gas Shift Reaction over Co-Precipitated Co–CeO2 Catalysts: Effect of Co Content on Selectivity and Carbon Formation

Copper-Based Water Gas Shift Catalysts for Hydrogen Rich Syngas Production from Biomass Steam Gasification

Highly Dispersed Copper over Β-Mo2c As an Efficient and Stable Catalyst for the Reverse Water Gas Shift (RWGS) Reaction

Cu/SiO2 derived from copper phyllosilicate for low-temperature water-gas shift reaction: Role of Cu+ sites

Partially sintered copper‒ceria as excellent catalyst for the high-temperature reverse water gas shift reaction

Structure of the catalytically active copper–ceria interfacial perimeter

Enhanced water gas shift reaction by CeO2 anchored Pt single atom catalyst

Direct evidence from STXM analysis of enhanced oxygen storage capacity in ceria through the addition of Cu and Mg: Correlation of HT-WGS reaction performance

DFT insights into structural effects of Ni-Cu/CeO2 catalysts for CO selective reaction towards water-gas shift

Highly Efficient Copper-Manganese Oxide Catalysts with Abundant Surface Vacancies for Low-Temperature Water-Gas Shift Reaction

Cu nanoparticles confined in TiO 2 nanotubes to enhance the water-gas shift reaction activity

CeO2-Supported Single-Atom Cu Catalysts Modified with Fe for RWGS Reaction: Deciphering the Role of Fe in the Reaction Mechanism by In Situ/Operando Spectroscopic Techniques

Copper-ceria catalysts with improved water and sulfur resistance: Computational design and structural optimization

Reconstruction of interface oxygen vacancy for boosting CO2 hydrogenation by Cu/CeO2 catalysts with thermal treatment