Abstract:Waste liquid treatment is widely concerned with the deepening of people's awareness of environmental protection, especially for the waste liquid with a high chemical oxygen demand (COD), which also has a high calorific value and makes it possible for the incineration treatment. In this study, the pyrolysis and combustion characteristics of pesticide waste liquid (PWL) are investigated by using thermogravimetric experiment and kinetic analysis, and the effects of different water and salt contents on its pyrolysis and combustion are discussed. The results show that both pyrolysis and combustion processes of the simulated pesticide waste liquid (sPWL) could be divided into two stages. As the water content increases from 0% to 18.5%, the volatilization characteristic index of stage I (low temperature) increases by 263.31%, while that of stage II (high temperature) decreases by 28.32%, and the water content could promote the pyrolysis and comprehensive combustion performance of the sPWL. As the sodium chloride contents increase from 0% to 1.5%, both the pyrolysis and combustion process of the PWL are enhanced, and the volatile release characteristic index, the ignition temperature and burnout characteristic index increase by 60.77%, 18.74% and 47.95%, respectively. By the means of the Coats-Redfern integral method, the kinetics of the pyrolysis and combustion of the PWL are analyzed, with a linear correlation coefficient of more than 95%. In a whole, a suitable water and sodium chloride content in the pretreatment process is crucial for efficient and low-cost treatment of waste liquid, which can promote the pyrolysis and combustion processes. These results are expected to provide several insightful guidance for the efficient treatment of the waste liquid.

The removal of organic contaminants from industrial waste salts by pyrolysis and potential use for energy storage

Investigation on Incineration of Salty Organic Wastewater

Experimental and numerical study on pyrolysis characteristics of organic impurities in waste salt

Comparative Organic Pollutants Removal Efficiency and Life Cycle Assessment of Pyrolysis and Solvent Elution for Industrial Waste Salt Recycling

Synergistic promotion of low-temperature pyrolysis and chloride complexation in waste salt purification process

An environmentally-friendly permeable liquid salt pyrolysis method based on capillary heat transfer for recycling waste insulator materials

Design and Performance Optimization of Solar Pyrolysis Reactor for Organic Impurities in Waste Salt

Deep purification of pesticide waste salt containing high-concentration organic pollutants by ethanol solvents washing and heating treatment

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

Experimental and kinetic study on pyrolysis and combustion characteristics of pesticide waste liquid

Molten Salt Shielded Pyrolysis of Biomass Waste: Development of Hierarchical Biochar, Salt Recovery, CO2 Adsorption

Purification and recovery of NaCl from epoxy resin waste salt through an integrated process based on aqueous two-phase systems (ATPS)

Deep Purification of Industrial Waste Salt Containing Organic Pollutants by a Dry Method with Non-thermal Plasma

Feasibility Study on A Novel Waste Heat Recovery Process of Industrial Waste Salt Based on High Temperature Melting Dry Method

Removal of impurities from waste tire pyrolysis char using the molten salt thermal treatment

Production of low molecular oil from typical polyolefin plastics through molten salts thermal treatment

Photoelectrocatalytic treatment and resource utilization of industrial waste salt for chlor-alkali electrolysis

An eco-friendly approach for NaCl recovery from organic pollutants-containing waste salt by roasting together with low-grade pyrolusite

Understanding and controlling the key crystal phase transformation for recovery of sodium chloride from organic waste salt

Isoconversional Kinetic Analysis of the Pyrolysis of Salt Lake Industrial Waste Bischofite with Isothermal Reaction Time Predictions

Molten salt oxidation of organic hazardous waste with high salt content