Abstract:The corrosion of steel structures in aggressive marine environments is a vital issue that induces significant degradation of their performance and lifespan. Herein, three arc-sprayed ZnAl coatings with varied Al contents of 0 wt.%, 15 wt.%, and 50 wt.% were deposited onto a hull steel substrate. The effect of Al content on the long-term corrosion protection performance of ZnAl coatings left in a chloride-containing solution for 840 h was systematically investigated. The evolutions of open-circuit potential, polarization curves, and electrochemical impedance spectroscopy of different ZnAl coatings during the long-term immersion test were examined. The morphologies and phase constitutions of the corrosion products were characterized. The results indicated that the corrosion rate of ZnAl coatings decreased as the Al content increased, and the ZnAl50 coating exhibited the most superior long-term corrosion protection performance. Moreover, for the three ZnAl coatings with an Al contents varying from 0 to 50%, their corrosion rate increased with immersion time in the initial 360 h due to the formation of the unstable and porous corrosion product ZnO; after 360 h immersion, their corrosion rate decreased with the prolonging of immersion time. This was revealed to be related to the formation of different corrosion products. ZnO and stable Al2O3 were the main corrosion products for the pure Zn coating and ZnAl15 coating, respectively. Al2O3 and powerful layered double hydroxide Zn6Al2(OH)16CO3·4H2O were found to be the dominant corrosion products of the ZnAl50 coating, which was responsible for its remarkable long-term corrosion protection performance.

Effect of Al2O3 particles on the corrosion behavior of molybdenum alloys in molten zinc

Mechanical properties and corrosion behavior in molten zinc of Mo–ZrO 2 alloys

Effects and mechanism of Zn on the structure and corrosion resistance of microarc oxidation coatings on aluminum alloy

Effects of Al-Mg on the Microstructure and Phase Distribution of Zn-Al-Mg Coatings

Effects of alloying concentration on the aqueous corrosion and passivation of aluminum-manganese-molybdenum concentrated alloys

Effect of Cooling Rate on Solidification Structure of Zinc-Aluminum-Magnesium Alloy

Enhancement of the corrosion resistance of Molybdenum by La2O3 dispersion

Effect of molybdenum on the oxidation resistance of FeCrAl alloy in lower temperature (400 °C) and higher temperature (1200 °C) steam environments

Corrosion Resistance Performance of Molybdenum-Containing Weathering Steel

Study on the Mechanism of Melting Oxidation of Zn-9Al-2.5Mg-Be Alloy

Mechanism of Mo content on improving the high-temperature corrosion performance of APS sprayed Ni-clad Al coatings in simulated biomass corrosion condition

Corrosion behaviors of Zr-Sn-Nb alloys: Influence of different concentration dissolved oxygen environment and trace V element on the anti-corrosion properties

Effects of Al content on microstructure and corrosion behavior of Zn-Al alloy coatings

Effect of Y2O3 on the corrosion resistance of two-step sintered Al5Y3O12-MgAl2O4 sidewalls in the aluminum electrolyte

Corrosion resistance enhanced by an atomic layer deposited Al2O3 /micro-arc oxidation coating on magnesium alloy AZ31

Corrosion Behavior of ZnO-reinforced Coating on Aluminum Alloy Prepared by Plasma Electrolytic Oxidation

Effect of Al Content on the Long-Term Corrosion Behavior of Arc-Sprayed ZnAl Alloy Coatings

On corrosion of zirconium alloy in dissolved oxygen water: The role of Cu addition

Effect of Mo Addition on Corrosion Behavior of High-Entropy Alloys CoCrFeNiMox in Aqueous Environments

The Microstructure and Corrosion Resistance of Fe-B-W-Mn-Al Alloy in Liquid Zinc

Effect of nano-oxides on corrosion resistance of Al2O3–ZrO2–C material