Abstract:For future pollution-free renewable energy production, platinum group metal (PGM)-free electrocatalysts are highly required for oxygen reduction reaction (ORR) to avoid all possible Fenton reactions and to make fuel cell more economical. Therefore, in this study, to overcome traditional electrocatalyst limitations, we applied facile method to synthesize robust mesoporous CrN-reduced graphene oxide (rGO) nanocomposite with MnO (thereafter, Cr/rGO composite with MnO) as an electrocatalyst by efficient one-step sol-gel method by ammonolysis at 900°C for 9 h. Synthesized porous structures of Cr/rGO nanocomposite with MnO have the highest estimated surface area of 379 m2·g−1, higher than that of the carbon black (216 m2·<math>gcat-1</math>) support, and almost uniform pore size distribution of about 4 nm. The Cr/rGO nanocomposites with MnO exhibit enhanced electrocatalytic ORR properties with estimated high half-wave potential of 0.89 V vs. the reversible hydrogen electrode (RHE) and current density of 5.90 mA·cm−2, compared with that of benchmark 20% Pt/C electrode (0.84 V, 5.50 mA·cm−2), with noticeable methanol tolerance and significantly enhanced stability in alkaline media. Hence, the Cr/rGO nanocomposites with MnO showed superior performance to 20 wt.% Pt/C; their half-wave potentials were 50 mV high, and the limiting current density was 0.40 mA·cm−2 high. In alkaline anion exchange membrane fuel cell (AAEMFC) setup, this cell delivers a power density of 309 mW·cm−2 for Cr/rGO nanocomposite with MnO, demonstrating its potential use for energy conversion applications. The nanosized Cr/rGO metallic crystalline nanocomposites with MnO gave a large active surface area owing to the presence of rGO, which also has an effect on the charge distribution and electronic states. Hence, it may be the reason that Cr/rGO nanocomposites with MnO, acting as more active and more stable catalytic materials, boosted the electrocatalytic properties. The synergistic consequence in nanosized Cr/rGO composite with MnO imparts the materials' high electron mobility and thus robust ORR activity in 0.1 M of KOH solution. This potential method is highly efficient for synthesis of large-scale, non-noble-metal-based electrocatalytic (NNME) materials (i.e., Cr/rGO nanocomposite with MnO) on the gram level and is efficient in preparing novel, low-cost, and more stable non-PGM catalysts for fuel cells.

Synthesis and characterizations of SrMnO3 with rGO nanosheets (SMO-rGO) in energy-related applications

One Step Hydrothermal Synthesis of Ni-MoS2-RGO Bifunctional Electrocatalysts for HER and OER

Fabrication of SrSnO3/rGO composite via hydrothermal technique as robust electrocatalyst for OER process

Solvo/Hydrothermal Preparation of MnOx@rGO Nanocomposites for Electrocatalytic Oxygen Reduction

Unlocking the Electrocatalytic Behavior of Cu2MnS2 Nanoflake-Anchored rGO for the Oxygen Evolution Reaction in an Alkaline Medium

Facile synthesis of perovskite SrCeO 3 nanocomposite with reduced graphene oxide via hydrothermal route for effective oxygen evolution reaction

Facile Synthesis of Amorphous Ternary Metal Borides-Reduced Graphene Oxide Hybrid with Superior Oxygen Evolution Activity

Synthesis of Mn loaded FeCo-MOF and its composites with reduced graphene oxide as highly efficient electrocatalysts for oxygen evolution and reduction reactions in metal-air batteries

Microwave assisted synthesis of Mn3O4 nanograins intercalated into reduced graphene oxide layers as cathode material for alternative clean power generation energy device

One-Pot Formation of an rGO-Based ZnAl 2 O 4 Nanocomposite for Electrochemical Studies toward Oxygen Evolution Reactions

Mn Doping of Cobalt Oxynitride Coupled with N-rGO Nanosheets Hybrid As a Highly Efficient Electrocatalyst for Oxygen Reduction and Oxygen Evolution Reaction

Highly dispersed MnO nanoparticles supported on N-doped rGO as an efficient oxygen reduction electrocatalyst via high-temperature pyrolysis

Analytical Techniques of Manufacturing Highly Effective MSO/rGO Nanocomposite for Future Energy Conversion Technologies

Promoting Electrocatalytic Oxygen Evolution over Transition-Metal Phosphide-Based Nanocomposites via Architectural and Electronic Engineering.

Novel Two-Dimensional Carbon–Chromium Nitride-Based Composite as an Electrocatalyst for Oxygen Reduction Reaction

Regulating the electronic structure of NiFe layered double hydroxide/reduced graphene oxide by Mn incorporation for high-efficiency oxygen evolution reaction

Well-dispersed NiCoS2 nanoparticles/rGO composite with a large specific surface area as an oxygen evolution reaction electrocatalyst

Facile Synthesis of Perovskite SrSnO3/N‐rGO Composite as a Durable Electrocatalyst for Effective Oxygen Reduction Reaction

Iron-doped nickel sulfide nanoparticles grown on N-doped reduced graphene oxide as efficient electrocatalysts for oxygen evolution reaction

Synthesis of transition metal sulfide and reduced graphene oxide hybrids as efficient electrocatalysts for oxygen evolution reactions

Efficient Oxygen Evolution Catalysis Triggered by Nickel Phosphide Nanoparticles Compositing with Reduced Graphene Oxide with Controlled Architecture