Abstract:Photovoltaic (PV) module soiling, i.e., the accumulation of dust on PV module surfaces, poses several challenges to PV system performance. Among these challenges, the nonuniform deposition of soiling across the module surface has received scarce attention. Soiling is directly associated with an overall performance loss, but can also potentially give rise to localised hotspots that can lead to long-term PV module failure. Therefore, addressing the issues arising from this nonuniformity is not only important for optimising energy production, but also for enhancing system reliability, and ensuring the long-term operation of relevant power generation systems. In this study, the impact of nonuniform soiling on PV performance is investigated experimentally by examining soil deposition on the upper surfaces of low-iron glass samples. Samples positioned at four different tilt angles were collected on a monthly basis over a one-year study period. Since the horizontal samples were found to represent the worst-case conditions, the most soiled sample at horizontal tilt was divided into four zones, each housing a single monocrystalline solar cell and examined further. The findings reveal that the soiled sample experiences an average transmittance deterioration of 13% relative to a clean sample, and a maximum (relative) spatial variation of 4% between the four zones. These optical losses affect the amount of sunlight received by the cells, resulting in a power deterioration of ∼6–7% per 5% drop in transmittance. The soiled sample experienced an average temperature rise of 2 °C, and an average power output (and efficiency) reduction of 30% relative to the clean sample, and a maximum (relative) spatial variation of 7% between the zones. The 30% average power loss measured in this nonuniform soiling case is more than double that which would be expected theoretically for a transmittance loss of 13% but from uniform soiling, so these results highlight the importance of addressing PV soiling for optimal PV performance, and of accounting for spatial soiling nonuniformity.

Effect of incidence angle on PV soiling loss

Correlating Photovoltaic Soiling Losses to Waveband and Single-Value Transmittance Measurements

Experimental investigation of nonuniform PV soiling

Macro- and microscale particle size effects of soil on photovoltaic surfaces

Effects of Sinusoidal Mid-Spatial Frequency Surface Errors on Optical Transfer Function

Selection of optimal wavelengths for optical soiling modelling and detection in photovoltaic modules

Effect of soiling on wind-induced cooling of photovoltaic modules and consequences for electrical performance

Unveiling the impact of climate diversity on solar PV soiling

Assessing Environmental Dynamics and Angular Influence on PV Soiling: Employing ANFIS to Mitigate Power Losses

Estimating PV Soiling Loss Using Panel Images and a Feature-Based Regression Model

Spectral nature of soiling and its impact on multi-junction based concentrator systems

Stochastic soiling loss models for heliostats in Concentrating Solar Power plants

Characterization of dust particles in South India and investigation on soiling image analysis for photovoltaic application

Optical losses of photovoltaic cells due to aerosol deposition: Role of particle refractive index and size

Analysis of dust deposition law at the micro level and its impact on the annual performance of photovoltaic modules

Particle size-dependent adhesion forces and wind removal efficiency of anti-soiling coatings on textured solar glasses

Estimation of Soiling Losses in Unlabeled PV Data

On the Temporal Modelling of Solar Photovoltaic Soiling: Energy and Economic Impacts in Seven Cities

Correlation between laboratory and outdoor soiling experiments with anti-soiling coatings

Novel and comprehensive approach for power loss estimation of soiled photovoltaic modules

Influence of incidence angle effects on the performance of bifacial photovoltaic modules considering rear-side reflection