Abstract:Considering the shortage and toxicity of raw materials, recycling cathode materials from spent lithium-ion batteries is currently the most promising measure to realize the green sustainability of cathode materials. Presently, most hydrometallurgical recovery methods and some cathode material synthesis methods are based on the use of acidic solutions. This study addresses the dissolution–chelation mechanism and limitations of the LiNi1/3Mn1/3Co1/3O2 cathode materials in acidic solution, aiming at highlighting the interface reaction mechanism. In this work, malonic acid and hydrogen peroxide were used as the leaching system to conduct efficient green leaching of spent ternary cathode materials. The effects of different reaction parameters on the recovery efficiency of various valuable metal ions were studied by orthogonal and single-factor condition experiments. The results show that under the optimal conditions the leaching efficiency of the lithium ion is 95%, and the leaching efficiencies of Ni, Co, and Mn all reached over 98%. The dissolution mechanism was studied at the macro- and microscales based on the material characterization technology, kinetic studies, and the theoretical calculations of the binding energy of the possible product. Kinetic studies found that the dissolution–chelation process is controlled by chemical reactions or a chemical and diffusion reaction, and calculation results of the activation energy and binding energy show that lithium ions are leached preferentially over other metal ions. In addition, this recovery technology can be effectively used to recycle other spent rechargeable battery materials and may also lay a theoretical foundation for further study on the regeneration and resynthesis of materials.This article has not yet been cited by other publications.

An effective tandem leaching method for recovering precious metals from depleted ternary lithium-ion batteries

High Efficiency Leaching of Valuable Metals from Waste Lithium-ion ternary Batteries under Mild Conditions Using Green Deep Eutectic Solvents

Sequential separation of critical metals from lithium-ion batteries based on deep eutectic solvent and electrodeposition

Deep eutectic solvent with acidity, reducibility, and coordination capability for recycling of valuable metals from spent lithium-ion battery cathodes

Green and efficient recycling method for spent Ni-Co-Mn lithium batteries utilizing multifunctional deep eutectic solvents

A novel ternary deep eutectic solvent for efficient recovery of critical metals from spent lithium-ion batteries under mild conditions

Extraction of precious metals from used lithium-ion batteries by a natural deep eutectic solvent with synergistic effects

Efficient Recovery of Value Metals from Spent Lithium-Ion Batteries by Combining Deep Eutectic Solvents and Coextraction

A Novel Green Process for Recovery of Transition Metal Ions from Used Lithium-ion Batteries by Selective Coordination of Ethanol

Green closed-loop regeneration of ternary cathode materials from spent lithium-ion batteries through deep eutectic solvent

Sustainable recycling of spent ternary lithium-ion batteries via an environmentally friendly process: Selective recovery of lithium and non-hazardous upcycling of residue

Leaching Mechanisms of Recycling Valuable Metals from Spent Lithium-Ion Batteries by a Malonic Acid-Based Leaching System

Recovery of valuable metals from spent ternary Li-ion batteries: Dissolution with amidosulfonic acid and d-glucose

Recovery of valuable metals from cathode materials of spent ternary lithium‐ion battery using natural product as reducing reagent

Low-viscosity acidic deep eutectic solvent for extraction of valuable metals from spent NCM

Recycling of Valuable Metals from the Priority Lithium Extraction Residue Obtained through Hydrogen Reduction of Spent Lithium Batteries

Selective Extraction of Critical Metals from Spent Li‐ion Battery Cathode: Cation‐Anion Coordination and Anti‐Solvent Crystallization

A Weak Acidic and Strong Coordinated Deep Eutectic Solvent for Recycling of Cathode from Spent Lithium-Ion Batteries

Separation of Valuable Metals in The Recycling of Lithium Batteries via Solvent Extraction

Leaching of valuable metals from cathode active materials in spent lithium-ion batteries by levulinic acid and biological approaches