Abstract:Removal of polar impurities, such as phospholipids, free fatty acids (FFA), and peroxides, can be challenging during the refining of crude canola oil. Current conventional refining methods are energy-intensive (e.g., hot water washes) and can generate significant waste (e.g., wastewater effluent) and neutral oil loss. This study investigated the joint use of nano-adsorbents and electrostatic field (E-field) treatment as a potential and sustainable alternative in removing these impurities during the oil refining process. Specifically, aluminum oxide (Al2O3) nanoparticles were employed to neutralize FFAs, achieving a 62.4% reduction in acid value while preserving the fatty acid profile of the oil. After refining, E-field treatment was successful in removing the spent nano-adsorbent from solution (up to 72.3% by weight), demonstrating enhanced efficiency compared to conventional methods (e.g., gravitational settling, filtration, and centrifugation). The neutral oil loss using Al2O3 nano-adsorbents was also comparable to conventional refining methods, with a 4.38% (by weight) loss. After E-field treatment, the Al2O3 nano-adsorbent was then calcined to assess reusability. The Al2O3 nano-adsorbent was effectively recycled for three refining cycles. the methods do not use of large amounts of water and generate minimal waste byproducts (e.g., effluent). Nonetheless, while the nano-adsorbents demonstrated promising results in FFA removal, they were less effective in eliminating peroxides and pigments. E-field techniques were also effective in removing spent nano-adsorbent; although, optimization of E-field parameters could further improve its binding capacity. Finally, future studies could potentially focus on the physicochemical modifications of the nano-adsorbent material to enhance their refining capacity and reusability. Overall, this study presents a sustainable alternative or addition to conventional refining methods and lays the groundwork for future research.

Removal of nickel and calcium from crude oil using core-shell materials grafted with N-substituted pyridines

Selectivity and capacity of the core-shell demetalizers for removal of nickel and calcium ions from heavy oil through conventional electric desalination process

One-step Removal of Alkynes and Propadiene from Cracking Gases Using a Multi-Functional Molecular Separator

Catalytic adsorptive of nickel metal from Iraqi crude oil using non-conventional catalysts

Efficient removal of both basic and non-basic nitrogen compounds from fuels by deep eutectic solvents

Adsorption of metal porphyrins using chitosan/zeolite-X composite as an efficient demetallization agent for crude oil: Isotherm, kinetic, and thermodynamic studies

Calcium phosphates synthesized from coralline materials (Porites) and their application as a demulsifier for water–oil separation

Selective and enhanced nickel adsorption from sulfate- and calcium-rich solutions using chitosan

Preparation and characterization of nanoporous resin for heavy metal removal from aqueous solution

Preparation of a Magnetic Core-Shell Bioreactor for Oil/Water Separation and Biodegradation.

Structural and Adsorptive Characteristics of 2D Multilayer Nanoflakes of NiCo Phosphates for Chromium(VI) Removal: Experimental and Monte Carlo Simulations

Oil Removal of Spent Hydrotreating Catalyst Como/Al2o3 Via A Facile Method with Enhanced Metal Recovery

Removal of hydrocarbon pollutants from refinery wastewater using N-hexadecylchitosan as an efficient adsorptive platform

Utilizing Nano-Adsorbents and Electrostatic Field Treatment for Sustainable Refinement of Crude Canola Oil

Deep oxidative desulfurization of gas oil by iron(III)-substituted polyoxometalate immobilized on nickel(II) oxide, ((n-C4H9)4N)4H[PW11FeO39]@NiO, as an efficient nanocatalyst

Removal of Mercury (II) by EDTA-Functionalized Magnetic CoFe2O4@SiO2 Nanomaterial with Core-Shell Structure

Efficient Removal of Cr (VI) and As (V) from Aqueous Solution Using Magnetically Separable Nickel Ferrite Nanoparticles

A novel removal of Ni2+ ions from water solutions using dispersive solid-phase extraction method with nano Fe3O4/chitosan-acrylamide hydrogel

Metal Removal from Nickel-Containing Effluents Using Mineral–Organic Hybrid Adsorbent

Physical properties of deep eutectic solvents with efficient nitrogen removal capability

Bifunctional hybrid magnetic colloidal clusters for efficient oil sludge recovery