Boosting the Rate Performance and Capacity of Sb2S3 Nanorods Cathode by Carbon Coating in All‐Solid‐State Lithium Batteries
Hongjun Ye,Zaifa Wang,Jitong Yan,Zhenyu Wang,Jingzhao Chen,Qiushi Dai,Yong Su,Baiyu Guo,Hui Li,Lin Geng,Congcong Du,Jing Wang,Yongfu Tang,Liqiang Zhang,Lingyun Zhu,Jianyu Huang
DOI: https://doi.org/10.1002/adfm.202204231
IF: 19
2022-07-26
Advanced Functional Materials
Abstract:Carbon coating dramatically improves the cyclability of Sb2S3 cathode in an InLi/LSPSCl/Sb2S3@C‐LSPSCl‐C all‐solid‐state lithium battery. A nanobattery is assembled in an environmental transmission electron microscope with Sb2S3@C cathode, Li anode, and Li2O electrolyte to further verify the effect of carbon coated to the lithiation and delithiation reaction kinetics and mechanisms. Antimony sulfide (Sb2S3) is a promising electrode material. However, its poor electronic/ionic conductivity severely hinders its practical application. Herein, carbon‐coated Sb2S3 nanorods (Sb2S3@C) are synthesized to address this issue. The electrochemical performance of the Sb2S3@C is evaluated in all‐solid‐state lithium batteries (ASSLBs) using InLi anode and Li10Si0.3PS6.7Cl1.8 solid‐state electrolytes. The Sb2S3@C cathode delivers the 1st cycle discharge capacity of 711 mAh g‐1 and a stable cycling capacity of 431 mAh g‐1, which are much higher than the 1st cycle discharge capacity of 125 mAh g‐1 and a stable cycling capacity of 320 mAh g‐1 for the uncoated Sb2S3 cathode. In situ transmission electron microscopy reveals that the carbon coating layer acts as an electronic/ionic conductive conduit, which boosts the charge transfer in the electrode dramatically. Consequently, the Sb2S3@C electrochemistry quickly evolves from intercalation to conversion to full alloying. However, the Sb2S3 nanorods without carbon coating undergo sluggish intercalation and conversion reactions, and the alloying reaction is almost impeded, severely limiting the capacity. Therefore, the Sb2S3@C electrode is fully utilized thus delivering much higher capacity and rate performance than the non‐coated Sb2S3 electrode. These results demonstrate that Sb2S3@C is a promising high‐energy‐density cathode for ASSLBs.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology