Abstract:In recent years, metal additive manufacturing (AM), also known as 3D printing, is grown massively in the industry. The ability of AM to build parts directly from the digital representation makes it an excellent alternative compared to traditional manufacturing technologies, such as milling, welding, casting, rolling, stamping, forging and turning for rapidly making highly customized parts. Currently, a number of different powder- and wire-based AM technologies are developed for 3D printing of metals. A number of potential benefits of AM are noted, including the allowance of design freedom, complex parts’ production, the material waste and part weight reductions, material use minimization; it also saves the time and money of the production cycle times. Due to the feasibility of the economically producing large-scale metal components with relatively high deposition rate, low machinery cost, high material efficiency, and shortened lead time as compared to the powder-based AM, the wire-based AM significantly attracted in the industry and academia due to its ability to produce the large components of the medium geometric complexity. During this AM process, the wire is fed by the controlled rate into the melt pool produced by the electric arc, laser or electron beam as the heat source. In the past few decades, the basic research and development efforts are devoted to the wire-based 3D printing parts made of Ti–6Al–4V alloy, which has been widely investigated and used in different fields such as aerospace, automotive, energy, marine industries and in addition to the prosthetics and the orthopaedic implants. Numerous studies in recent years on the influence of the 3D printing parameters have shown a significant difference in the mechanism and kinetics of the microstructure formation in the Ti–6Al–4V alloy samples compared to traditional technologies. It is well investigated that the mechanical properties of such alloy are dependent on the solidification macro- and microstructure, which is controlled by the thermal conditions during 3D printing. In the present review, the main microstructural characteristics, which determine the mechanical properties of the two-phase Ti–6Al–4V alloy, are analysed for the samples obtained by wire-feed 3D printing with various sources used for the wire melting, namely, the electric arc, the laser, and the electron beam. At first, the review introduces the links between the process parameters, resultant microstructures, especially, the morphology, the size and the quantitative ratio of the α and β grains in the as-printed Ti–6Al–4V alloy samples. However, the metallic products manufactured by a vast majority of the AM processes need to be post-processed by heat treatment and/or hot isostatic pressing, which are also discussed in this review.

Process parameters for three-dimensional specimens made of Ti6Al4V materials using additive manufacturing: A review

Additive manufacturing of Ti-6Al-4V alloy- A review

The State of the Art in Machining Additively Manufactured Titanium Alloy Ti-6Al-4V

A review on process parameters, microstructure and mechanical properties of additively manufactured AlSi10Mg alloy

Additive manufacturing of titanium-based alloys- A review of methods, properties, challenges, and prospects

Design of titanium alloys by additive manufacturing: A critical review

Microstructural development during additive manufacturing of biomedical grade Ti-6Al-4V alloy by three-dimensional binder jetting: material aspects and mechanical properties

Investigating mechanical and surface porosity values of high-performing 3D-printed titanium alloys along with stress-relieving heat treatments

Overview of Machinability of Titanium Alloy (Ti6Al4V) and Selection of Machining Parameters

Advances in additively manufactured titanium alloys by powder b e d fusion and directed energy deposition: Microstructure, defects, and mechanical behavior

Effect of Process Parameters on the Microstructure and High-Temperature Strengths of Titanium Aluminide Alloy Fabricated by Electron Beam Melting

A Review of Additive Manufacturing Techniques and Post-Processing for High-Temperature Titanium Alloys

Wire-Feeding Based Additive Manufacturing of the Ti–6Al–4V Alloy. Part I. Microstructure

Effect of process parameter optimization on morphology and mechanical properties of Ti6Al4V alloy produced by selective laser melting

Selective Laser Melting of Ti6Al4V: Effects of Heat Accumulation Phenomena due to Building Orientation

Laser Metal Deposition of Ti6Al4V—A Brief Review

The effect of process parameters on the stability and efficiency in the laser powder bed fusion of Ti-6Al-4 V based on the interval powder layer thickness

Investigation on influence of selective laser melting parameters on mechanical properties of Ti-6Al-4V alloy

A two-decade odyssey in fusion-based additive manufacturing of titanium alloys and composites

Uncertainty of Additive Manufactured Ti-6Al-4V: Chemistry, Microstructure and Mechanical Properties

Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti6Al4V Alloy Fabricated by Selective Laser Melting