Abstract:The textile industry's high-salinity wastewater presents a significant difficulty for fractioning salts and dyes. To fractionate the dyes and salts, a high-performance CPVC composite loose nanofiltration membrane (LNM) was fabricated by interfacial polymerization. The organic phase was obtained by crosslinking polyethylenimine (PEI) with tannic acid (TA) and gallic acid (GA) using TMC. The resultant composite LNM performance was enhanced by adjusting the coating parameters, which included TA and GA concentrations as well as coating time. The study examined the effects of the total content of TA/PEI and GA/PEI concentrations on the chemical structure, surface roughness, and microstructure of the selective layer of LNM using SEM, AFM, FTIR, and water contact angle measurements. It also investigated the filtration performance of the membrane's selective layer, including pure water flux, PEG800 rejection rate, and membrane fouling analysis. However, the resultant membrane treated simulated reactive black 5 (RB5) dye wastewater. When the total content of TA/PEI is 4 kg L-1, the permeability of pure water flux is high at 7.5 L per m2 per h per bar when the total content of GA/PEI is 14 kg L-1 and the pure water flux is high at 8.8 L per m2 per h per bar. The overall PEG800 rejection rates were 97-98.98%. The optimal TA : PEI ratios reached a good pure water permeability up to 6.4 L per (m2 per h per bar) with a high rejection rate of 99.69% for a ratio 1/3 to dye, and GA : PEI ratios reached a good water permeability at 5.5 and 6.5 L per (m2 per h per bar) with rejection rates of 99.21% and 98.88% for ratio 1/3 and 3.5/10.5 for simulated RB5 dye, and the NaCl retention rate gradually decreased from 4% to 3%. The resultant LNM demonstrated promising applications in dye and salt fractionation.

Development of eco-friendly coating for the fabrication of high performing loose nanofiltration membranes for dye-contaminated wastewater treatment

Tailoring the Selectivity of Quasi-Pims Nanofiltration Membrane Via Molecular Flexibility of Acyl Chloride Monomers for Desalination from Dye Effluents

Hydrolysis Co-Deposition of Bio-Inspired Hybrid Hydrophilic Network Antifouling Loose Nanofiltration Membrane for Effective Dye/Salt Separation

Poly(vinyl Alcohol)-Based Highly Permeable TFC Nanofiltration Membranes for Selective Dye/salt Separation

Facile and Novel Fabrication of High-Performance Loose Nanofiltration Membranes for Textile Wastewater Recovery

Tuning of Nanofiltration Membrane by Multifunctionalized Nanovesicles to Enable an Ultrahigh Dye/salt Separation at High Salinity

Ultra-permeable Polyamide Nanofiltration Membrane Modified by Hydrophilic-Hydrophobic Alternated Lignocellulosic Nanofibrils for Efficient Water Reuse

Preparation of a CPVC composite loose nanofiltration membrane based on plant polyphenols for effective dye wastewater treatment

Tannic Acid-Polyethyleneimine Crosslinked Loose Nanofiltration Membrane for Dye/salt Mixture Separation

Toward Tailoring Nanofiltration Performance of Thin-Film Composite Membranes: Novel Insights into the Role of Poly(vinyl Alcohol) Coating Positions

Development of loose nanofiltration PVDF hollow fiber membrane for dye/salt separation

Confinedly Assembling Surface Nanocoating to Manipulate Nanofiltration Membranes for Highly-efficient Dye Removal

Dye Sieving and Dye/salt Separation PEI-based Loose Nanofiltration Membrane Modified by NH2-MIL-101(Fe) and Polyphenol Coating

Loose Nanofiltration Membranes with Assembled Antifouling Surfaces of Organophosphonic Acid/fe(iii) for Managing Textile Dyeing Effluents

Construction of Loose Positively Charged NF Membrane by Layer-by-Layer Grafting of Polyphenol and Polyethyleneimine on the PES/Fe Substrate for Dye/Salt Separation

COFs Functionalized Self-Cleaning Loose Nanofiltration Membranes for Efficient Dye/salt Separation

Dye sieving and dye/salt separation PEI-based loose nanofiltration membrane modified by NH 2 -MIL-101(Fe) and polyphenol coating

Selective separation of dye/salt mixtures via a tannic acid-polyethyleneimine-modified hollow fiber membrane with high flux

Rod-coated PVA interlayer induced nanofiltration membrane: Method development and application for separation of dye/NaCl with greater performance

Loose Nanofiltration Membrane Incorporating CeZnFe Layered Double Hydroxide with Enhanced Dye/Salt Separation Performance and Self-Cleaning Ability

A novel loose nanofiltration membrane with high permeance and anti-fouling performance based on aqueous monomer piperazine-2-carboxylic acid for efficient dye/salt separation