Abstract:High-voltage switch control cabinet plays a key role in power generation, transmission, distribution, and energy conversion in the power system, including on/off, control, or protection of power supply. During their operation, partial discharge may occur. Therefore, it is necessary to develop a high precision positioning robot to reduce personnel risks. This study focuses on the deviation of AGV (Automated Guided Vehicle, AGV) path guidance, the accuracy of the robotic arm to positioning electrical components, and the detection of contact between robotic arm and target, which designs an AGV path correction controller, proposes a target positioning method based on residual BP neural network, and a collision detection method based on friction disturbance compensation. Firstly, the kinematics and dynamics of the diagonal steering wheel robot system are analyzed. Secondly, based on the kinematic and dynamic models of the AGV, the first motion fuzzy controller is designed with the AGV position and angle deviation as input and the AGV steering angle as output. The variable domain scaling factor is inferred through speed grading, and the second motion fuzzy controller is designed. A variable domain fuzzy controller based on speed grading is developed by combining the two fuzzy controllers. Then, the dimensional features of the target are fused with the camera's imaging model to derive the world coordinate system and pixel coordinates. By utilizing the advantage of residual networks to avoid gradient disappearance and reducing the workload of a single neural network, three residual BP neural networks are used to map coordinate transformation functions and obtain the three-dimensional coordinate information of the target. Finally, considering friction force as a disturbance term in the joint motion of the robotic arm, the joint friction force is estimated by a second-order disturbance observer, and an external torque observer based on friction disturbance compensation was established for collision detection. The results show that the speed grading variable domain fuzzy controller can achieve rapid and smooth path deviation correction across various speeds of AGV, effectively. The residual BP neural network has an average positioning error of 0.629 mm. The collision detection method of the robotic arm with friction disturbance compensation demonstrates high accuracy in detection. This study can effectively improve the safety and accuracy of operation for high-voltage switch control cabinets.

Research on Time Delay Estimation Control Strategy of HV Transmission Line Operating Robot

Precise Motion Control of a Power Line Inspection Robot Using Hybrid Time Delay and State Feedback Control.

Time-Delay Sliding Mode Control for Trajectory Tracking of Robot Manipulators

Fuzzy Terminal Sliding Mode Control with Compound Reaching Law and Time Delay Estimation for HDU of Legged Robot

Dynamic Modelling Using Screw Theory And Nonlinear Sliding Mode Control Of Serial Robot

Research on trajectory tracking control of delta high-speed parallel robot based on PTNTSMC

A novel adaptive robust control architecture for bilateral teleoperation systems under time-varying delays: A novel adaptive robust control architecture for bilateral teleoperation systems under time-varying delays

Research on up and down line control method of 500kV live working robot

Research on dual-arm coordination motion control strategy for power cable mobile robot

Fixed time sliding mode control for disturbed robotic manipulator

Adaptive Terminal Sliding Mode Control for Time-delay Teleoperation with Uncertainties

Robust motion control of live-line maintenance robot mechanical arm for high-voltage transmission line based on H∞ theory

Intelligent Model-Free Control for Power Line Inspection Robots: Tackling Input Time Delays with Data-Driven Solutions

Controller Design for a Teleoperation System with Time Delay

Predefined-time Terminal Sliding Mode Control of Robot Manipulators

Dynamic model based energy consumption optimal motion planning for high-voltage transmission line mobile robot manipulator

Study on deviation correction and target positioning of intelligent operation robot for high-voltage switchgear

Adaptive Nonsingular Terminal Sliding Mode Control with Time-Delay Estimation for Linear Motor Systems

Research on Trajectory Tracking Control of Manipulator Based on Modified Terminal Sliding Mode with Double Power Reaching Law

Trajectory Tracking Control for a Cable-Driven Space Manipulator Using Time-Delay Estimation and Nonsingular Terminal Sliding Mode

Structure singular value theory based robust motion control of live maintenance robot with reconfigurable terminal function for high voltage transmission line