Abstract:The geological conditions in Yunnan Province, China, are intricate, and numerous challenges are anticipated during tunnel excavation. The goal of this study was to develop a high resolution detection approach combining probe drilling and horizontal cross-hole resistivity tomography to interpret water conducting channels ahead of the tunnel. A complex section of the Xianglu Mountain tunnel was taken as an example. Drilling data from 10 boreholes are used to establish the initial resistivity model ahead of the tunnel face. The utilization of drilling data as a priori information refines the horizontal cross-borehole resistivity tomography imaging results, providing a more accurate depiction of the subsurface conditions. In practical applications, the use of multiple boreholes for high resolution detection via probe drilling analysis and horizontal cross-hole resistivity tomography is relatively uncommon in complex underground environments and represents an engineering innovation. At the Xianglu Mountain tunnel site, 13 electrical resistivity tomography (ERT) profiles were executed to thoroughly assess the geological conditions. A 3-D resistivity model was constructed via interpolation of this dataset. The 3-D resistivity model not only facilitated precise estimation of the 3-D hydrogeological environment at the Xianglu Mountain tunnel site but also enhanced the accuracy of identifying the water conducting channels by revealing low-resistivity interconnected zones. This approach offers a precise guide for determining the location of the critical water conducting channels and for optimizing grouting treatment strategies based on the characterization, geometry, resistivity spatial distribution, and hydrogeological conditions of the studied zones. The acquired results, which are in good accordance with the reality of the studied area in terms of locating the water conducting channels, can be utilized to develop preventative techniques for water and mud inrush disasters during tunnel construction.

A high resolution detection approach combining probe drilling and horizontal cross-hole resistivity tomography to interpret water conducting channels ahead of the tunnel: A case study in Yunnan, China