Abstract:Phased arrays have demonstrated great potential in 5/6G communication, radar and sensor applications [1– 4]. To achieve excellent performance, phased arrays require low-noise and high-linearity front-ends [5]. Most importantly, arrays demand uniform performance from all elements for optimum receiving G/T value and transmission effective isotropic radiated power (EIRP) [6]. Figure 14.7.1 exemplifies it with an array whose antenna element has 3dBi uniform gain on one side and no radiation on the other side. When all elements in an $8 \\times 1$ linear array with a $\\lambda/2$ space have identical characteristics, the array presents a 19dBi gain in the normal direction. Any temperature change in the array can be decomposed into an absolute temperature change superposed with a relative temperature variation. When the absolute temperature increases, the frontend gain decreases by as much as $-0.1dB/^{\\circ}C$ [1]. When there is non-uniform solar radiation or heat generation inside the array, the relative temperature variation may present a gradient or a parabolic distribution. Taking a $64 \\times1$ array as an example, when there is a gain/phase mismatch with an average value of $0.125dB/1.25^{\\circ}$ between adjacent elements in a parabolic distribution locating at the center of the array, the formed beam presents a 1.4dBi main-lobe reduction in the normal direction and an 11.9dBi side-lobe degradation, shown in Fig. 14.7.1. It also shows an active array receiver front-end highlighting all the temperature-sensitive blocks. Calibration can adjust temperature-dependent performances [7]. However, periodic calibration inevitably takes time overhead and prevents array systems from full-time operations. Digital background calibration allows systems to operate uninterrupted, but may induce antenna boresight instability due to abrupt gain/phase change. In contrast, analog background calibration like adaptive healing design can resolve the above issues [8]. In this paper, we present an adaptive analog temperature healing receiver front-end with ± $0.005 dB/^{\\circ}C$ gain variation from -15 to $85^{\\circ}C$ environment temperature for a 17.7-to-19.2GHz phased array.

A 37–43.5-GHz Phase and Amplitude Detection Circuit With 0.049$^{\circ}$ and 0.036-dB Accuracy for 5G Phased-Array Calibration Using Transformer-Based Injection-Enhanced ILFD

A 25-31Ghz Compact True Power Detector with >33db Dynamic Range in 40nm Bulk CMOS

An Adaptive Analog Temperature-Healing Low-Power 17.7-to-19.2GHz RX Front-End with 0.005dB/C Gain Variation, <1.6dB NF Variation, and <2.2dB IP<sub>1dB</sub> Variation across-15 to 85C for Phased-Array Receiver

14.7 An Adaptive Analog Temperature-Healing Low-Power 17.7-to-19.2GHz RX Front-End with ±0.005dB/°C Gain Variation, <1.6dB NF Variation, and <2.2dB IP1dB Variation across -15 to 85°C for Phased-Array Receiver.

A C-Band Compact High-Linearity Multibeam Phased-Array Receiver With Merged Gain-Programmable Phase Shifter Technique

Calibration of a Digital Phased Array by Using NCO Phase Increasing Algorithm

A Four-Element 7.5–9-Ghz Phased-Array Receiver with 1–8 Simultaneously Reconfigurable Beams in 65-Nm CMOS

A Calibration Scheme for 24–28-Ghz Variable-Gain Phase Shifter in 65-Nm CMOS

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

Local Oscillator Phase Shifting and Harmonic Mixing-Based High-Precision Phased Array for 5G Millimeter-Wave Communications

A 3.8-Db NF, 23-40Ghz Phased-Array Receiver with 14-Bit Phase & Gain Manager and Calibration-Free Dual-Mode 28-52Db Image Rejection Ratio for 5G NR.

A 33.5-37.5 GHz 4-Element Phased-Array Transceiver Front-End with High-Accuracy Low-Variation 6-bit Resolution 360° Phase Shift and 0~31.5 dB Gain Control in 65 nm CMOS

A 26/28/39-Ghz Reconfigurable Phased-Array Receiver Front-End with Built-In Calibration Technique for 5G New Radio

Design of a 20-GHz Phased-Array Receiver with high-precision Gain and Phase Control in 65nm CMOS

A 4-Element 60-Ghz CMOS Phased-Array Receiver with Transformer-Based Hybrid-Mode Mixing and Closed-Loop Beam-Forming Calibration

A 5.5-6.5Ghz Multi-Function Receiver with 6bit Phase Shifter and 31.5db Gain Control for Phased Array in 180nm CMOS

A 21 to 30-Ghz Merged Digital-Controlled High Resolution Phase Shifter-Programmable Gain Amplifier with Orthogonal Phase and Gain Control for 5-G Phase Array Application

A 39-GHz CMOS Bidirectional Doherty Phased- Array Beamformer Using Shared-LUT DPD With Inter-Element Mismatch Compensation Technique for 5G Base Station

A 39-Ghz CMOS Bi-Directional Doherty Phased-Array Beamformer Using Shared-LUT DPD with Inter-Element Mismatch Compensation Technique for 5G Base-Station

A 37–42-GHz 8 × 8 Phased-Array With 48–51-dBm EIRP, 64–QAM 30-Gb/s Data Rates, and EVM Analysis Versus Channel RMS Errors

A 24-27Ghz Phased Array Transceiver with 6bit Phase Shifter and 31.5db Gain Control for 5G Communication in 65nm CMOS