Abstract:Martensitic steels, engineered to meet automotive weight reduction and crashworthiness requirements, are highly susceptible to hydrogen embrittlement (HE). Despite extensive research to improve HE resistance, these steels remain vulnerable to HE after undergoing resistance spot welding (RSW). HE in spot-welded steels has been largely unexplored, and its underlying mechanism remains unclear. This study investigates the HE mechanism in RSWed steel sheets by examining microstructural alterations and hydrogen trapping sites before and after RSW. Additionally, the study analyzes variations in tensile-shear test (TST) properties relative to increasing hydrogen content. In spot-welded steels, the tensile-shear strength and fracture displacement decline as diffusible hydrogen levels increase. Specifically, fracture displacement sharply declines within the first 3 h of hydrogen charging, but this loss rate significantly decreases thereafter. This slope shift is attributed to a transition in the crack propagation path. Initially, cracks propagate along the fusion zone line, featuring transgranular failure. However, beyond a critical hydrogen content, crack propagation shifts to the prior austenite grain boundary (PAGB) in the upper critical heat-affected zone (UCHAZ), exhibiting intergranular failure. Consequently, when hydrogen content surpasses this critical threshold, the PAGB in the UCHAZ is weakened due to hydrogen-enhanced decohesion (HEDE) and hydrogen-enhanced localized plasticity (HELP). Cracks then propagate along the PAGB in the direction of maximum stress during the tensile-shear test (TST), leading to a change in the crack propagation path.

Analysis of hydrogen-induced cracking mechanism in quenching and partitioning steels

Analysis of hydrogen-induced delayed cracking and hydrogen trapping behavior in plastically deformed quenching and partitioning steel

Numerical Simulation on Hydrogen Induced Cracking Behavior of 4130X Hydrogen Storage Vessel with Defect

Effect of hydrogen charging intensities and times on hydrogen embrittlement of Q&P980 steel

Improving Hydrogen Embrittlement Resistance of Hot-Stamped 1500 MPa Steel Parts That Have Undergone a Q&P Treatment by the Design of Retained Austenite and Martensite Matrix

Hydrogen influence on some advanced high-strength steels

Simultaneous improvement of hydrogen embrittlement resistance and tensile strength of quenching and partitioning steel through dense multiple interfaces

Limit and Shakedown Analysis under Hydrogen Embrittlement Condition

Effect of pre-strain on critical conditions for hydrogen-induced delayed cracking and crack nucleation characteristic of DP1180 steel

Hydrogen Embrittlement of Advanced High-Strength Steel for Automobile Application: A Review

Effect of microstructure on hydrogen embrittlement susceptibility in quenching-partitioning-tempering steel

Embrittlement of Notched Duplex Stainless Steel: Role of Hydrogen-Assisted Void Growth and Cleavage

Hydrogen Embrittlement of Advanced High-Strength Steel for Automobile Application:A Review

Comparative evaluation on hydrogen damage behavior of two martensitic high strength press hardening steels

A critical perspective on pipeline processing and failure risks in hydrogen service conditions

Study on Mechanical Behaviours and Microstructure Features of Q690 Steel Weldments with Various Electrochemical Hydrogen Charging Conditions

Impact of hydrogen embrittlement on the tensile-shear property of resistance spot-welded advanced high-strength martensitic steels

Current Challenges and Opportunities Toward Understanding Hydrogen Embrittlement Mechanisms in Advanced High-Strength Steels: A Review

Experimental study on slow tensile, fatigue, and impact on X42 steel and #20 carburizing steel

Hydrogen embrittlement mechanisms in advanced high strength steel

Research on Hydrogen-Induced Induced Cracking Sensitivity of X80 Pipeline Steel under Different Heat Treatments