Abstract:Groundwater recharge engineering practices are usually accompanied by the migration and deposition of polydisperse particles. Solid particles may be retained in the pore space leading to clogging of the porous media and reducing groundwater recharge efficiency. However, the mechanism behind this clogging phenomenon remains poorly understood. Specifically, the relation of particle clogging at pore-scale and macroscale is unclear. Here, the influence of polydisperse particle size on clogging development patterns was studied utilizing a series of laboratory −scale column experiments in conjunction with pore-scale scanning electron microscopy (SEM) experiments. Particles with median particle sizes (d p50 ) of 0.66, 4.05, 11.83 μm were injected separately into the sand column to simulate particle clogging that occurs during groundwater recharge. SEM was used to directly observe particles deposition on porous media grain surface after the column experiments. By counting the size distribution of the particles on the media grain surface, the response of the particle deposition to the surface morphology of the media grains was analysed. Compared to d p50 of 4.05 and 11.83 μm, the spatial distribution of particles deposited in the sand column was more uniform at d p50 of 0.66 μm. The smallest particles (d p50 = 0.66 μm) used in the experiments ultimately formed mixed clogging, which was the result of the combined effects of particle deposition and aggregation. The particle deposition with d p50 = 4.05 and 11.83 μm ultimately exhibited hyper-exponential distribution and formed mixed and superficial clogging, respectively. At the same time, the concave region of the media grain surface played a dominant role in particle deposition. For d p50 = 4.05 μm, 69.41 % of the particles were deposited in the concave region, and for d p50 = 11.83 μm, the proportion was 90.1 %. The results help to better manage particle clogging in groundwater recharge and other engineering applications (e.g., groundwater source heat pump, and filtration project). In addition, these findings provide a theoretical reference for the development of numerical models to help recognize the probability of particles of different sizes to be captured in porous media.

Study on the clogging of suspended particles with different particle sizes in porous media in in situ leaching of uranium

Experiment Research on Physical Clogging Mechanism in the Porous Media and Its Impact on Permeability

Physical experiment and pore-scale investigation of the clogging of polydisperse particles in saturated porous media during artificial groundwater recharge

Clogging of Infiltration Basin and Its Impact on Suspended Particles Transport in Unconfined Sand Aquifer: Insights from a Laboratory Study

Large Strain Consolidation of Dredged Slurries Considering Clogging Effect with Coupled Vertical–radial Flow

The permeability evolution mechanism of ore-bearing strata during acid in-situ leaching of uranium: A case study of Bayanwula uranium mine in Inner Mongolia of China

Numerical Study on Clogging of Prefabricated Vertical Drain in Slurry under Vacuum Loading

Quantifying the Impact of Mineralogical Heterogeneity on Reactive Transport Modeling of CO2 + O2 In-Situ Leaching of Uranium

Consolidation Considering Clogging Effect under Uneven Strain Assumption

3D characterization of porosity and minerals of low-permeability uranium-bearing sandstone based on multi-resolution image fusion

Study on precipitation and plugging mechanism in CO2 + O2 in-situ leaching of uranium in Nalinggou uranium deposit

Experimental investigation on the influence of surfactant to the seepage characteristics of acid leaching solution during in-situ leaching of uranium

What Chemical Reaction Dominates the CO2 and O2 In-Situ Uranium Leaching? Insights from a Three-Dimensional Multicomponent Reactive Transport Model at the Field Scale

What chemical reaction dominates the CO 2 and O 2 in-situ uranium leaching? Insights from a three-dimensional multicomponent reactive transport model at the field scale

Reactive Transport Numerical Modeling of CO2+O2 In-Situ Leaching in Sandstone-Type Uranium Ore

Research on Leaching Behavior of Uranium from a Uranium Tailing and Its Adsorption Behavior in Geotechnical Media

Clogging and Unclogging of Fine Particles in Porous Media: Micromechanical Insights From an Analog Pore System

Numerical Study of Percolation and Seepage Behaviors in Ion-Adsorption-Type Rare Earth Ore Leaching Process

Particle clogging mechanisms in hyporheic exchange with coupled lattice Boltzmann discrete element simulations

Evolutional solid phase and solid-liquid interface uranium immobilization mechanisms by nanoscale zero-valent iron and enhanced uranium stability control strategy

Pore-Scale Simulations of Particles Migration and Deposition in Porous Media Using LBM-DEM Coupling Method