Abstract:The widely used Li batteries (LiBs) is the most established rechargeable energy storage device. Therefore, the development of new electrode and electrolyte materials is essential for improving battery performance. Solid polymer electrolytes (SPEs) have been presented as safer alternatives for liquid electrolytes as they tend to be non-flammable, have enough mechanical strength to resist dendrite growth, and do not leak. However, these materials tend to be less conductive than liquid electrolytes. This problem can be solved by solid-state gel polymer electrolytes (GPEs), which have lately received more attention. In fact, present a possible solution to this dilemma as they combine the ionic conductivity of liquid electrolytes with the increased safety of SPE to develop of electrolytes with high ionic conductivity and good mechanical stability. 1 This work presents a preparation of in-situ GPE from SPE which produce by dry process in order to take advantage of the easy processability of SPE and the higher ionic conductivity of GPE. 2, 3 The initial SPE was prepared by combining two polymers with LiTFSI (bis(trifluorormethanesulfonyl)imide) via extrusion mixing. This method of GPE processing was also found to improve other aspects of the electrolyte such as thermal and electrochemical properties which were characterized using cycling voltammetry, electrochemical impedance spectroscopy, and thermal gravimetric analysis. Additionally, the salt-polymer interaction in the GPE was characterized using FTIR, NMR, and the homogeneity of the polymer blend study by SEM-EDX. The cell of LFP/electrolyte/ Li metal showed a high capacity near to the theoretical one at C/20 at temperature 60 C. Additionally, the ionic conductivity of the electrolyte is around 10 -5 S/cm. These first results confirmed that this blend of the polymers is a good electrolyte candidate for lithium batteries. Verdier, N.; Lepage, D.; Zidani, R.; Prebe, A.; Ayme-Perrot, D.; Pellerin, C.; Dolle, M.; Rochefort, D., Cross-linked polyacrylonitrile-based elastomer used as gel polymer electrolyte in Li-ion battery. ACS Applied Energy Materials 2019, 3 (1), 1099-1110. Ma, C.; Cui, W.; Liu, X.; Ding, Y.; Wang, Y., In situ preparation of gel polymer electrolyte for lithium batteries: Progress and perspectives. InfoMat 2021. Verdier, N.; Foran, G.; Lepage, D.; Prébé, A.; Aymé-Perrot, D.; Dollé, M., Challenges in Solvent-Free Methods for Manufacturing Electrodes and Electrolytes for Lithium-Based Batteries. Polymers 2021, 13 (3), 323.

The Promise of 3D Printed Solid Polymer Electrolytes for Developing Sustainable Batteries: A Techno-Commercial Perspective

Solid‐State Revolution: Assessing the Potential of Solid Polymer Electrolytes in Lithium‐Ion Batteries

Progress in Solid Polymer Electrolytes for Lithium‐Ion Batteries and Beyond

Recent Progress of Polymer Electrolytes for Solid-State Lithium Batteries

Practical challenges and future perspectives of solid polymer electrolytes: microscopic structure and interface design

Tuning the Properties of a UV-Polymerized, Cross-Linked Solid Polymer Electrolyte for Lithium Batteries

Recent progress in ultra-thin solid polymeric electrolytes for next-generation lithium batteries

Lithium Metal Polymer Electrolyte Batteries: Opportunities and Challenges

A reflection on polymer electrolytes for solid-state lithium metal batteries

Review—Solid and Polymer-Based Electrolyte Materials and Processing Methods Suitable for Three-Dimensional Battery Architectures

Designing polymer electrolytes for advanced solid lithium-ion batteries: Recent advances and future perspectives

Dry-Processable Polymer Electrolytes for Solid Manufactured Batteries

Ion transport and structural design of lithium-ion conductive solid polymer electrolytes: a perspective

Ultrathin Solid Polymer Electrolyte Design for High‐Performance Li Metal Batteries: A Perspective of Synthetic Chemistry

(Digital Presentation) Post-Treatment Study on Blended Polymer for Solid-State Lithium Batteries

Advances of Solid Polymer Electrolytes with High-Voltage Stability

Designing biomass-integrated solid polymer electrolytes for safe, energy-dense lithium metal batteries

Rational Design of F-Modified Polyester Electrolytes for Sustainable All-Solid-State Lithium Metal Batteries

Solid Polymer Electrolytes with Dual Anion Synergy and Twofold Reinforcement Effect for All-Solid-State Lithium Batteries

Solvent-Free Synthesis of the Polymer Electrolyte Via Photo-Controlled Radical Polymerization: Toward Ultrafast In-Built Fabrication of Solid-State Batteries under Visible Light.