Abstract:The increase of global environmental restrictions concerning solid and liquid industrial waste, in addition to the problem of climate change, which leads to a shortage of clean water resources, has raised interest in developing alternative and eco-friendly technologies for recycling and reducing the amount of these wastes. This study aims to utilize Sulfuric acid solid residue (SASR), which is produced as a useless waste in the multi-processing of Egyptian boiler ash. A modified mixture of SASR and kaolin was used as the basic component for synthesizing cost-effective zeolite using the alkaline fusion-hydrothermal method for the removal of heavy metal ions from industrial wastewater. The factors affecting the synthesis of zeolite, including the fusion temperature and SASR: kaolin mixing ratios, were investigated. The synthesized zeolite was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), particle size analysis (PSD) and N2 adsorption-desorption. The SASR: kaolin weight ratio of 1:1.5 yields faujasite and sodalite zeolite with 85.21% crystallinity, which then shows the best composition and characteristics of the synthesized zeolite. The factors affecting the adsorption of Zn2+, Pb2+, Cu2+, and Cd2+ ions from wastewater on synthesized zeolite surfaces, including the effect of pH, adsorbent dosage, contact time, initial concentration, and temperature, have been investigated. The obtained results indicate that a pseudo-second-order kinetic model and Langmuir isotherm model describe the adsorption process. The maximum adsorption capacities of Zn2+, Pb2+, Cu2+, and Cd2+ ions onto zeolite at 20 °C were 12.025, 15.96, 12.247, and 16.17 mg·g−1, respectively. The main mechanisms controlling the removal of these metal ions from aqueous solution by synthesized zeolite were proposed to be either surface adsorption, precipitation, or ion exchange. The quality of the wastewater sample obtained from the Egyptian General Petroleum Corporation (Eastern Desert, Egypt) was highly improved using the synthesized zeolite and the content of heavy metal ions was significantly reduced, which enhances the utilization of the treated water in agriculture.

Template-free conversion of rice husk silica into nano-zeolite X and its application in adsorption of heavy metal ions

Synthesis of High-Quality NaP1 Zeolite from Municipal Solid Waste Incineration Fly Ash by Microwave-Assisted Hydrothermal Method and Its Adsorption Capacity.

Synthesis of a Novel Magnetic Nano-Zeolite and Its Application As an Efficient Heavy Metal Adsorbent

Heavy Metal Adsorption with Zeolites: the Role of Hierarchical Pore Architecture

Rapid ultrasound assisted hydrothermal synthesis of highly pure nanozeolite X from fly ash for efficient treatment of industrial effluent

Preparation of melamine formaldehyde/nanozeolite Y composite based on nanosilica extracted from rice husks by sol–gel method: adsorption of lead (II) ion

Sustainable and Efficient Synthesis of Nanosized EMT Zeolites under Solvent-Free and Organotemplate-Free Conditions

Facile synthesis of zeolite NaX using rice husk ash without pretreatment

Synthesis of Nano-silica Oxide for Heavy Metal Decontamination from Aqueous Solutions

Zinc Oxide Nanoclusters Encapsulated in MFI Zeolite as a Highly Stable Adsorbent for the Ultradeep Removal of Hydrogen Sulfide

In Situ Hydrothermal Conversion of Silica Gel Precursors to Binderless Zeolite X Pellets for Enhanced Olefin Adsorption

Removal of Heavy Metal Pollutants from Waters by Adsorption on Molecular Sieve Zeolite-A

Green Synthesis and Efficient Adsorption: Na-X Zeolite vs. C/Mn/SiO2 Composite for Heavy Metals Removal

Synthesis of Na-A zeolite loaded bentonite and its application for removal of Cu(II) from aqueous solutions

Synthesized Zeolite Based on Egyptian Boiler Ash Residue and Kaolin for the Effective Removal of Heavy Metal Ions from Industrial Wastewater

Hybrid surfactant-templated mesoporous silica formed in ethanol and its application for heavy metal removal.

Regulating the particle sizes of NaA molecular sieves toward enhanced heavy metal adsorption

Removal of heavy metal ions from aqueous solution by zeolite synthesized from fly ash

Synthesis of Zeolites from Coal Fly Ash Using Alkaline Fusion and Its Applications in Removing Heavy Metals

Biosourced adsorbent prepared with rice husk part 1: A complete understanding of the structure of materials, the major role of mineral impurities for metal extraction

Methylcellulose-Directed Synthesis of Nanocrystalline Zeolite NaA with High CO2 Uptake