Abstract:Over the past twenty years, metal-organic frameworks (MOFs) have emerged as extensively developed porous class of materials and are increasingly recognized as promising candidates for membrane-based CO2 separation. This potential primarily stems from the ability to deliberately customize their structure and functionalities to enhance interactions with guest molecules. In this study, we explore the use of MOF-525, a porphyrin-based MOF, as a nanofiller in a mixed matrix membrane (MMM) composed of 6FDA-DAM (6FDA: 2,2-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride; DAM: 2,4,6-trimethyl-1,3-diaminobenzene) polymer for CO2/N2 and CO2/CH4 separations. This particular MOF is chosen because of the possibility to metalate its porphyrin ring to tailor the interaction between the CO2 molecule and the MOF framework. As a result, the CO2/N2 and CO2/CH4 separation performance of the MMM loaded with metalated MOF-525 can be significantly improved without the necessity to use a very high nanoparticle loading. When compared to the bare polymeric membrane and 2 wt% non-metalated MOF-525 MMM, around 20% improvement in the membrane permeability and selectivity can be observed for the 2 wt% metalated MOF-525 MMM. Further analysis on the gas transport property of the MMM showed that the improvement mainly results from the enhanced CO2 solubility in the MMMs and improved interaction between the metalated MOF-525 and the CO2 molecule. However, it is also found that 2 and 5 wt% are the optimum loading value, above which the interfacial defects between the MOF nanoparticles and the polymers caused by the particle agglomeration starts to appear and thus deteriorating the membrane performance. This is also confirmed through the molecular simulations where some overestimations from the Maxwell model on the membrane permeability is observed particularly at high particle loading, indicating the agglomeration and the build-up of non-selective voids. Despite this, we have successfully shown in this study the high efficacy and efficiency of using metalated porphyrin MOFs for CO2 separation in a MMM since only relatively low particle loading (around 2 wt%) is required to improve the membrane performance.

Impregnation of amine functionalized deep eutectic solvents in NH2-MIL-53(Al) MOF for CO2/N2 separation

Understanding the CO2 capture performance by MDEA-based deep eutectics solvents with excellent cyclic capacity

Improving the Separation of CO 2 /N 2 Using Impregnation of a Deep Eutectic Solvent on a Porous MOF

Ethylenediamine-functionalized metal organic frameworks MIL-100(Cr) for efficient CO2/N2O separation

CO2 Absorption with Diamine Functionalized Deep Eutectic Solvents in Microstructured Reactors

Imidazole–Monoethanolamine-Based Deep Eutectic Solvent for Carbon Dioxide Capture: A Combined Experimental and Molecular Dynamics Investigation

High-Selective CO2 Capture in Amine-Decorated Al-MOFs

Structural Modulation of UiO-66-NH2 Metal-Organic Framework Via Interligands Cross-Linking: Cooperative Effects of Pore Diameter and Amide Group on Selective CO2 Separation

Experimental investigation of novel ternary amine-based deep eutectic solvents for CO2 capture

Computational screening of metal–organic frameworks for separation of CO2 and N2 from wet flue gas

Modification of activated carbon with nitrogen-based deep eutectic solvents for enhanced CO2 adsorption

A Robust Adenine-Based Microporous Metal-Organic Framework with Hydrophobic Alkyl Groups and Abundant Lewis Basic Sites for CO2/N2 Separation

Amide-Functionalized In-MOF for Effective Hydrocarbon Separation and CO 2 Catalytic Fixation

Investigation of MOF-525 and post-metalated MOF-525 as nanofillers in mixed matrix membranes for CO2 separation

Effect of incorporated hybrid MIL-53(Al) and MWCNT into PES membrane for CO2/CH4 and CO2/N2 separation

CO2 and N2 adsorption and separation using aminated UiO-66 and Cu3(BTC)2: A comparative study

Capturing CO2 by Ionic Liquids and Deep Eutectic Solvents: A Comparative Study Based on Multi-Level Absorbent Screening

High-performance CO2-selective Hybrid Membranes by Exploiting MOF-breathing Effects.

Molecular Design of Metal-Organic Frameworks with Different Metal Ligands for Bio-Methane Separation

Amine-based Deep Eutectic Solvents for CO2 Capture: Experiments and Molecular Thermodynamics

A Charged Metal-Organic Framework For Co2/Ch4 And Co2/N-2 Separation