Abstract:Flexible droplet preparation and manipulation are significant for lots applications such as immunoreaction and monocellular culture. Herein, we present a novel method for effective on-chip droplet generation, splitting and switching via controllable hydrodynamics. The microchannel of the designed chip has 6 inlets and 3 three outlets. The water solution is injected from a specific inlet (inlet d), and the other 5 inlets are used to inject oil fluids. Under the shearing effect of immiscible oils, the water phase breaks into dispersed droplets first, and the generated droplets can be further split into daughter drops or switched into side outlets from the middle outlet. To investigate the hydrodynamic droplet manipulation behaviors, a two-dimensional simulation model based on phase-field method is established. Utilizing the computational model, we systematically analyze the influences of the flow rates of continuous and dispersed fluids and the manipulation modes on droplet generation, splitting and switching. The numerical results indicate that the droplets can be generated with controlled sizes. For instance, at Qd = 5 μL/min and Qc1,2 = 5 μL/min, the droplet diameter decreases from 89.2 μm to 49.2 μm as Qs1,2 gradually rises from 15 μL/min to 40 μL/min. Moreover, the prepared droplets can realize on-demand splitting and switching. When Qd, Qc1,2, and Qs1,2 are fixed at 5 μL/min, 5 μL/min and 25 μL/min, respectively, the generated droplet is split into different proportional daughter drops with the rising of Qs3 (or Qs4) at first, and finally it is switched into the side-outlets when Qs3 (or Qs4) is higher than 80 μL/min. Therefore, this proposed droplet manipulation approach will be promising for various applications, and the numerical simulations can provide useful guidelines on the design and operation of droplet-based microfluidic systems.

Flexible Fractal Integration of Microfluidic Modules for Controllable Mass Production of Monodisperse Microdroplets

Monodisperse Droplets by Impinging Flow-Focusing

Scalable Droplet Generator Design Using Parallel-Arranged Capillaries with Axial Misalignment

Intensification of liquid mixing and local turbulence using a fractal injector with staggered conformation

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

Designable Microfluidic Ladder Networks from Backstepping Microflow Analysis for Mass Production of Monodisperse Microdroplets.

Highly efficient droplet generation device based on a three-dimensional fractal structure

Scalable Production of Monodisperse Functional Microspheres by Multilayer Parallelization of High Aspect Ratio Microfluidic Channels

Modeling of Droplet Traffic in Interconnected Microfluidic Ladder Devices

Simple and Flexible Production of Controllable Emulsion Droplets from Open-Type Co-Flow Microfluidics

Theoretical Study on Sequential Splitting of Droplets Flowing Through Fractal Tree-Shaped Microchannel Networks

Fabrication of Diverse Microparticles in a Unified Microfluidic Configuration

A 3D-Printed Standardized Modular Microfluidic System for Droplet Generation

Facile and Scalable Rotation-Based Microfluidics for Controllable Production of Emulsions, Microparticles, and Microfibers

Droplet Pattern Formation and Translation in New Microfluidic Flow-Focusing Devices

Flexible On-Chip Droplet Generation, Switching and Splitting Via Controllable Hydrodynamics

High-Throughput Microfluidic Production of Droplets and Hydrogel Microspheres through Monolithically Integrated Microchannel Plates

An Integrated Microfluidic Device for Droplet Manipulation

Plug-n-play microfluidic systems from flexible assembly of glass-based flow-control modules.

Simple and Reusable Off-The-Shelf Microfluidic Devices for the Versatile Generation of Droplets

Microfluidic large-scale integration on a chip for mass production of monodisperse droplets and particles.