Abstract:Fermented shrimp is a widely used condiment and flavor additive in various local dishes and dips for boiled vegetable products, especially in East and Southeast Asia. Spray-drying of this product offers advantages in ease of transport and storage and may prolong the shelf-life versus traditional packaging in bottles. The study aimed to optimize the spray-drying operating conditions for developing a fermented shrimp powder with acceptable quality using response surface methodology (RSM) with central composite design (CCD). The study identified the dilution ratio of 1:1 to 1:4 of the fermented shrimp-to-water solution to extract the maximum flavor from the fermented shrimp before the spray-drying process. The effects of the independent variables: inlet temperature (140–180 °C) and feed flow rate (15–35 mL/min) on the response variables: percent yield (%), moisture content (%), and water activity (aw) were studied for the production of spray-dried powder with acceptable quality and maximum flavor of fermented shrimp. Verification experiments were conducted to validate the accuracy of the predictive models. Results showed the optimum operating conditions to produce spray-dried fermented shrimp powders were at an inlet temperature of 180 °C and a feed flow rate of 21.26 mL/min. At optimum spray-drying conditions, the predicted powder yield was 27.77 ± 2.75%, moisture content was 3.84 ± 0.29%, and the water activity was 0.347 ± 0.010. The quadratic models showed that all independent variables have significant (p < 0.05) effects on the response variables. The coefficients of the quadratic model for all combinations of the inlet temperature and feed flow rate have significant (p < 0.05) effects on the percent yield, moisture content, and water activity, as illustrated in the 3D surface and contour plots. The quadratic models predicted the responses, which indicates the suitability of the model for the development of spray-dried fermented shrimp powders with acceptable quality properties. The findings of the study have imparted a valuable understanding of the effects of inlet temperature and feed flow rate on the quality characteristics of the spray-dried fermented shrimp powder. This information will assist the fishery products industry in utilizing the fermented shrimp for powder production, which could help in ease of transport, storage, handling, and prolonging of shelf life compared to the traditional bottled liquid fermented shrimp samples.

Optimization of Spray-drying Conditions for the Development of Fermented Shrimp Powder Using Response Surface Methodology

RSM As an Approach to Optimize Ginger Intermittent Microwave Drying Process

A Predictive Model for Assessment of Decontamination Effects of Lactic Acid and Chitosan Used in Combination on Vibrio Parahaemolyticus in Shrimps

Optimization of Spray Drying of Ginger Extract

Optimization of spray-drying process parameters on strawberry (Fragaria ananassa D.) extracts microcapsules quality

Optimization of conditions for isolation of high quality chitin from shrimp processing raw byproducts using response surface methodology and its characterization

A Brief Overview of Spray Drying Technology and Its Potential in Food Applications

Response Surface Optimization of Deproteinization from Shrimp Shell by Pepsin

Preparation of Powdered Seasoning with Shrimp-like Flavor from the Aqueous Residue of Isada Krill by Subcritical Water Treatment and Spray-drying

Control the Effects Caused by Noise Parameter Fluctuations to Improve Pharmaceutical Process Robustness: A Case Study of Design Space Development for an Ethanol Precipitation Process

Optimizing the Alcohol Precipitation of Danshen by Response Surface Methodology

Development of functional extruded snacks by utilizing paste shrimp (Acetes spp.): process optimization and quality evaluation

Optimization of spray drying process parameters for the food bioactive ingredients

Utilization of Shrimp Waste (Litopenaeus vannamei) as Powdered Broth: Effects of Roasting Duration on Protein Content, Color Changes, and FTIR

Optimization of Spray Drying Conditions for Developing Nondairy Based Probiotic Sohiong Fruit Powder

Response Surface Methodology (RSM) Approach to Optimization of Coagulation-Flocculation of Aquaculture Wastewater Treatment Using Chitosan from Carapace of Giant Freshwater Prawn Macrobrachium rosenbergii

Modification on Drying Chamber Wall of Spray Dryer Towards Better Yield

Utilization of Shrimp Head Wastes into Powder Form as Raw Material for Value-Added Products

Electrospraying of Bio-Based Chitosan Microcapsules Using Novel Mixed Cross-Linker: Experimental and Response Surface Methodology Optimization

Optimization of spray-drying process for the microencapsulation of L. Plantarum (MCC 2974) in ultrasound hydrated finger millet milk

Study on the Quality of Natural Flavor Powder made from Shrimp Waste