Abstract:Due to the characteristics of high energy storage efficiency, large energy storage capacity and constant phase change temperature, organic phase change materials have been widely used in the field of thermal energy storage . However, organic phase change materials present a lower thermal conductivity which emerges as a critical limitation to the energy storage efficiency of latent heat thermal energy storage systems. To improve the thermal properties, the superior composite phase change materials of graphene aerogel impregnated paraffin wax were prepared in present study. Hydrothermal reaction method was used to prepare aerogel. Optimal conditions for aerogel preparation were identified as 140 °C/2.5 h/90%/(1:100) (140 °C is the hydrothermal working temperature of the reactor, 2.5 h indicates a treatment time, 90% is the solution occupying the reactor volume and 1:100 is the graphene oxide (GO)/water ratio in the solution). Furthermore, the addition of ethylenediamine and graphene nanoplatelets accelerated the reaction process, which required a hydrothermal treatment time by 50%. For the composite phase change material PW-GO/GNP-3 with a GO/GNP mass fraction of 4.4%, the thermal conductivity was 209.7% of that for the pure PW and the energy storage efficiency was still maintained at 91.60%. Meanwhile, the composite phase change material exhibits a leakage ratio of lower than 3.8%. In addition, based on the prepared composite phase change material samples, the phase change characteristics of phase change material in single cavity and three-cavities have also been examined. The synchronous phase change in three-cavities has been obtained by arranging the phase change material with low melting temperature in the cavity with low temperature, which requires the shortest melting time.

Preparation and thermal energy storage properties of shaped composite phase change materials with highly aligned honeycomb BN aerogel by freeze-vacuum drying under the control of a temperature gradient

Thermal Energy Storage Performance of Paraffin-Based Composite Phase Change Materials Filled with Hexagonal Boron Nitride Nanosheets

Construction of high thermal conductive boron Nitrid@Chitosan aerogel/ paraffin composite phase change material

Phase Change Materials of Paraffin in H-Bn Porous Scaffolds with Enhanced Thermal Conductivity and Form Stability

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

Composite aerogel incorporating low temperature phase change microcapsules for enhanced thermal insulation

High thermal conductivity of porous graphite/paraffin composite phase change material with 3D porous graphite foam

3D zirconium phosphate/polyvinyl alcohol composite aerogels for form-stable phase change materials with brilliant thermal energy storage capability

High-enthalpy aramid nanofiber aerogel-based composite phase change materials with enhanced thermal conductivity

Biomass derived carbon aerogel as an ultrastable skeleton of form-stable phase change materials for efficient thermal energy storage

Carbon nanotubes modified graphene hybrid Aerogel-based composite phase change materials for efficient thermal storage

Unidirectional thermal conduction in electrically insulating phase change composites for superior power output of thermoelectric generators

High performance composite phase change materials enhanced via evaporation-induced hydrogen bond network refactoring

Mineral‐based Composite Phase Change Materials Assembled into 3D Ordered Aerogels for Efficient Wearable Filtration and Thermal Management

Three-dimensional directional cellulose-based carbon aerogels composite phase change materials with enhanced broadband absorption for light-thermal-electric conversion

Three-Dimensional Macroporous rGO-Aerogel-Based Composite Phase-Change Materials with High Thermal Storage Capacity and Enhanced Thermal Conductivity

Engineering nanocellulose/graphene hybrid aerogel for form-stable composite phase change materials with high phase change enthalpy for energy storage

Material preparation and heat transfer characterization of porous graphene aerogel composite phase change material

Assembling and characterizing of high-loading and steady-shape graphene aerogel composite phase change material with nano-AlN─as an efficient thermal conductivity enhancer

Polypyrrole coated carbon nanotube aerogel composite phase change materials with enhanced thermal conductivity, high solar-/electro- thermal energy conversion and storage

The establishment of Boron nitride @sodium alginate foam/ polyethyleneglycol composite phase change materials with high thermal conductivity, shape stability, and reusability