Enhanced treatment of azo dyes in wastewater using heat-activated persulfate with micro-nano bubble aeration
Yang Yang,Xue Yao,Shuhui Wu,Xiao Wang,Lei Feng,Xuedong Feng,Yanfei Ma
DOI: https://doi.org/10.1016/j.cherd.2023.07.013
IF: 4.119
2023-07-27
Chemical Engineering Research and Design
Abstract:Azo dyes-containing wastewater can lead to environmental issues and pose threats to public health. The efficient degradation of azo dyes with novel and potent techniques, remains a challenge. This study presented an innovative utilization of micro-nano bubble aeration technology to improve the treatment of Rhodamine B through heat-activated persulfate oxidation. Through single factor experiments, the impacts of persulfate concentration, temperature, initial Rhodamine B concentration, and pH values were systematically explored on the degradation of Rhodamine B in heat-activated persulfate oxidation. The removal rate of Rhodamine B was 94.53% optimized by Response surface optimization method. The reaction rate was in the range of 0.0109–0.0528 min −1 , governed by pseudo-first-order kinetics. By applying the Arrhenius equation, the activation energy was determined to be 14.06 KJmol −1 . Furthermore, properties of micro-nano bubbles and their synergistic coefficient were investigated in heat-activated persulfate oxidation. Quenching tests revealed the predominance of sulfate radicals, and full wavelength scanning facilitated an in-depth investigation of the reaction mechanism. Additionally, a proposed electron shell structure elucidated the decomposition process of Rhodamine B. Therefore, the implementation of micro-nano bubble aeration technology based on heat-activated persulfate oxidation, held the promise as an efficient and effective approach for the treatment of printing and dyeing wastewater. In this study, the influence of a vortex finder shape with different hydraulic diameters on the pressure drop, flow pattern, and separation efficiency of a square cyclone separator was analyzed using Computational Fluid Dynamics (CFD). The considered vortex finders included square and cylindrical shapes with hydraulic diameters of 0.25, 0.5, and 0.75 times the square part hydraulic diameter of the cyclone separator. In this study, the Euler–Lagrange approach was applied to model two-phase flow inside square cyclone separators. The results demonstrated that the use of a cylindrical vortex finder increased the pressure drop and separation efficiency. Moreover, as the relative hydraulic diameter changed from 0.5 to 0.25, the pressure drop increased ten-fold, and the separation efficiency increased from 34.2 % to 83.1 % at an inlet velocity of 20 m/s and a particle diameter of 8 μm. In the cyclone separator with De/D= 0.75, employing the square vortex finder led to a decrease in the separation efficiency and an increase in the pressure drop compared to the cylindrical vortex finder because of dividing the inlet flow into two branches. Two variants of a four-blade axial impeller with diagonally rounded large-surface blades have been developed in order to reach two goals. First, the impeller should be hydrodynamically optimized for coagulation and flocculation processes (wastewater treatment), and second, the manufacturing severity and costs should be low (easily manufacturable impeller). The main process characteristics (power characteristics, blending characteristics, and hydrodynamic characteristics) of both variants of the impeller have been performed in various vessel-to-impeller configurations and the results are presented in the paper. The obtained values were compared with other standard impellers and TECHMIX hydrofoil impellers, and it was found that one of the proposed variants (4TR10) seems to be a perspective hydrofoil impeller for blending processes in the chemical, pharmaceutical, or mining industry. The coagulation/flocculation performance of the impeller has been tested and the results proved that the impeller produces the highest ratio of macroaggregates and the lowest ratio of non-aggregated particles compared to standard impellers. Advanced oxidation processes (AOPs) are highly efficient for the removal of antibiotics from water. The activation of hydrogen peroxide (H 2 O 2 ) by ultraviolet (UV) has garnered increasing attention. This study describes the enhanced photochemical degradation of emerging contaminants in water using a UV-activated calcium peroxide (UV/CaO 2 ) system, wherein CaO 2 can gently produce H 2 O 2 when exposed to UV light. The UV/CaO 2 system can expeditiously and efficiently eradicate ciprofloxacin (CIP), in which hydroxyl radicals (•OH) and superoxide anions (O 2 •- ) played critical roles. The superlative rate constant was 0.024 min −1 at an optimal dosage of 0.1 g L −1 , which was a 16-fold increase over the rate of pure UV photolysis. The UV/CaO 2 system had an excellent defluorination capacity (80% within 60 min). Further, this technology was intensely evaluated over a wide range of pH for the removal of CIP, including H< -Abstract Truncated-
engineering, chemical