Abstract:Objectives: The incorporation of thiourethane-based oligomeric additives into resin composite formulations leads to improvement in mechanical properties and reduction in polymerization stress, but may increase viscosity. The objective of this study was to functionalize filler particle surfaces with thiourethane silane molecules and determine the impact of the inorganic filler loading and surface treatment on the behavior of experimental resin composites with systematically-varied organic matrices. Methods: Thiourethane oligomer was synthesized de novo, and grafted to the surface of 0.7um barium glass. BisGMA and TEGDMA (BT) were combined (at 30:70, 50:50 or 70:30 wt%) to 50 or 75 wt% of methacrylate (MA-Sil - control) or thiourethane-silanized (TU-Sil) particles. Composites were made polymerizable by the addition of 0.2 wt% BAPO and 0.05 wt% BHT was added as inhibitor. A mercury arc lamp (320-500 nm) at 800 mW/cm2 was used for all curing procedures. Kinetics of polymerization was assessed by near-IR spectroscopy in real time. Polymerization stress was determined with a cantilever system in real time (Bioman). Flexural modulus and strength were determined in 3-point bending (25x2x2 mm). Water sorption and solubility and film thickness were tested according to ISO 4049. Polymeric network characteristics were analyzed by dynamic mechanical analysis (DMA). Data was analyzed with two-way ANOVA/Tukey's test (95%). Results: Viscosity increased with the increase in BisGMA and/or filler amounts. Overall, TU-Sil containing composites showed delayed vitrification and higher final DC. Filler concentration did not affect DC neither flexural strength. DC decreased with increasing BisGMA content. Polymerization stress reduced and flexural modulus increased for higher filler content, especially for formulations containing TU-Sil particles. The water stability was positively affected by the increase in amount of BisGMA and inorganic filler particles. In terms of polymeric network, the addition of TU-Sil particles increased the Tg and decreased the E' and cross-link density. Conclusions: With the exception of flexural modulus, all tested properties were significantly impacted by the matrix viscosity and/or the addition of TU-Sil filler particles. In general, the use of thiourethane oligomers as a silane coupling agent was able to reinforce the materials and reduce the polymerization stress without negatively affecting the viscosity of the system.

The improvement in properties of polyester resin-based composites using a new type of silane coupling agent

Behavior of epoxy resin filled with nano-SiO<sub>2</sub> treated with a Eugenol epoxy silane

Siloxane-modified Polyester:Synthesis and Features of Its Powder Coatings

The Effect of Silane Coupling Agent Containing Methacryloxy Group on UV-Curable Acrylate-Modified Polyurethane/SiO2 Hybrid Coatings

Effect of Silane Coupling Treatment on the Adhesion between Polyamide and Epoxy Based Composites Reinforced with Carbon Fibers

Effect Of Organosilane Coupling Agents On Microstructure And Properties Of Nanosilica/Epoxy Composites

Effect of silane coupling agent on compatibility interface and properties of wheat straw/polylactic acid composites

Improving performance of natural rubber composites by the application of functional biofiller: horsetail modified with silane coupling agents

Effect of silica modified by silane coupling agent on properties of epoxy resin composites

Improvement of UHMWPE Fibers Interfacial Properties by Aminosilane/silica Synergistic Modification

Improvement of interface interaction and conductive anodic filament resistance through amphiphilic oligomeric silane

Effect of Silane Coupling Agent on the Mechanical Properties of Oil Palm Frond Fiber Composite

Recent Progress in Silane Coupling Agent with Its Emerging Applications

Surface Modification of Poly(urea-formaldehyde) Microcapsules and the Effect on the Epoxy Composites Performance

Regulating interfacial compatibility with amino silane and bio-inspired polydopamine for high-performance epoxy composites

Effect of the Presence of a Silane Coupling Agent on Reaction Kinetics of Cationic Thermopolymerization of Epoxy Resin Adhesive

Effect of Different Silane Coupling Agents on Properties of Waste Corrugated Paper Fiber/Polylactic Acid Composites

Silane-modified wood fiber filled EPDM bio-composites with improved thermomechanical properties

Influence of silane coupling agents on the interfacial structure and properties of modified polypropylene/aluminum alloy composites prepared by hot-press molding

Physico-Mechanical and Rheological Properties of Epoxy Adhesives Modified by Microsilica and Sonication Process

Influence of the organic matrix composition on the polymerization behavior and bulk properties of resin composites containing thiourethane-functionalized fillers