Abstract:A reference material (RM), as defined by the International Vocabulary of Metrology (VIM 2012), must be homogeneous, stable, and suitable for use in measurements. Certified reference materials (CRMs) are RMs with documented property values, uncertainties, and traceability. ISO 17034:2018 outlines the requirements for RM producers, ensuring that CRMs meet standards for stability, uniformity, and reproducibility. In Europe, CE marking, from French "conformité Européenne", which means European conformity, has been mandatory for thermal insulation products since 2002, ensuring their thermal performance is verified by accredited laboratories using RMs like IRMM440 and ERM FC440. Annually, European manufacturers produce over 200 million cubic meters of thermal insulation, necessitating thousands of thermal conductivity measurements daily to maintain CE marking compliance. Key characteristics of Reference Materials include long-term stability, thermal conductivity within specified ranges, and minimal dependence on density, thickness, and applied load. Sample thickness must conform to apparatus specifications, and homogeneity must be quantified. Reference Materials must also have appropriate dimensions, surface smoothness, and manufacturability. The Joint Research Centre (JRC) Geel has produced two Reference Materials, IRMM 440 and ERM FC 440, with specific characteristics to meet these requirements. Both are glass wool fibers with low thermal conductivity and specific density and thickness. The qualification of RMs involves inter-laboratory comparisons to ensure the accuracy and traceability of thermal conductivity measurements. The European market's organization, including the use of Reference Materials and CE marking, has significantly improved measurement consistency and product quality. This system has led to lower uncertainties in thermal conductivity measurements compared to North America, highlighting the impact of standardized RMs on industry practices. Future needs include developing RMs with lower conductivity and increased thickness to accommodate market trends towards super insulation materials and bio-based components, enhancing energy performance calculations for buildings. This paper will present the process of defining a reference material and how it affects the uncertainty level of the calculation of building energy performance. This level depends on the characteristics of the materials used, their implementation, and external factors, such as the weather, as well as the reference material used for calibration of all European thermal conductivity measurement devices.

On the Stability Testing of Reference Materials

Algorithms for Homogeneity Testing of Reference Materials of Dispersed and Solid Materials

A statistical method for the assessment of metrological characteristics of reference materials

Assessment and investigation of measurement uncertainty of standard samples of substances and materials in physicochemical measurements based on standard test methods

Approaches for the production of reference materials with qualitative properties—The new International Standard ISO 33406

Detection of Inconsistencies in Isotope Ratios Certified in the Isotopic Primary Standards for Copper, Zinc and Nickel

Metrological Support in the Field for the Development of Reference Materials of Isothermal Titration Calorimetry: Prospects

Use of an excess variance approach for the certification of reference materials by interlaboratory comparison

On the Problem of Stability of Small Objects by the Example of Molecular Dynamics Models of Metal Nanoparticles and Nanosystems

Stability and predictability of Zener reference voltage standards: long-term experience by the Lithuanian National Metrology Institute

Determination of in vitro stability of routine haematinics tests using EFLM standards and the CRESS checklist

Metrology for Indoor Radon Measurements and Requirements for Different Types of Devices

Interlaboratory study of the operational stability of automated sorption balances

The stability of 65 biochemistry analytes in plasma, serum, and whole blood

Reference Materials for Thermal Conductivity Measurements: European Situation

Towards the compatibility of stable isotope data: review of related concepts, recent progress with reference materials and current challenges

Drug Stability: ICH versus Accelerated Predictive Stability Studies

Biological Reference Materials: Topical Issues of Development and Certification Procedure

Permissible limits for uncertainty of measurement in laboratory medicine

Improvement of the Russian National Secondary Standard of the Unit of Length Using Latest Ultra-Stable Laser Equipment

Quality Management System in Production of Reference Materials