Preparation of Lightweight Calcium Silicate Board with Low Chlorine Dissolution Rate Using Ti-Extracted Blast Furnace Slag and Fly Ash

Lin Li,Tao Jiang,Jing Wen,Bojian Chen
DOI: https://doi.org/10.1007/s40831-023-00711-3
2023-07-11
Journal of Sustainable Metallurgy
Abstract:The clean industrial development of titanium extraction from blast furnace slag is of great significance to the development of the titanium industry in China. Ti-extracted blast furnace slag (Ti-extracted BFS) with 3.48 wt% chlorine content is a metallurgical solid waste generated during titanium extraction from high-titanium blast furnace slag. Ti-extracted BFS harms the environment and hampers the sustainable development of the entire vanadium titanium magnetite process. In this study, fly ash was utilized as a light raw material to prepare lightweight calcium silicate boards. The influences of different fly ash and Na2SO4 content on the material properties of the calcium silicate boards were investigated. A Ti-extracted BFS: Portland cement: fly ash: Ca(OH)2: quartz: fume ash weight ratio of 40:15:15:11.4:15:3.6 with 0.5 wt% Na2SO4 content was used to prepare the optimal calcium silicate board sample. The bulk density of this sample was 1.38 g/cm3, and the dissolution rate of chlorine was 0.62%. Moreover, the optimal CaCl2 content accelerated the hydration reaction and improved the bending strength of the prepared dechlorinated Ti-extracted BFS-based samples. These calcium silicate boards were able to fix chloride ions, which was mainly dependent on the adsorption and curing capacity of calcium silicate (aluminate) hydrate gels (C-(A)-S-H). This research suggests a new strategy for the overall utilization of chlorine-containing Ti-extracted BFS and provides essential guidance for utilizing similar slag.Graphical Abstract
metallurgy & metallurgical engineering,green & sustainable science & technology
What problem does this paper attempt to address?