Abstract:The conventional semi-active variable damping (VD) device can only dissipate the vibration energy, which inherently limits its performance in vibration control. This paper proposes a novel semi-active inerter concept and develops a prototype with magnetorheological (MR) dampers, which can store the vibration energy in a flywheel and then release it to suppress vibration. The new idea is inspired by a variable inertance (VI) device, which has a VD device and a passive inerter in serial, and a passive mechanical motion rectifier (MMR), which can convert the reciprocating input into a unidirectional output. The controllable MMR (CMMR) applies two VD devices to replace the two one-way roller clutches in the MMR. By equipping the CMMR, the semi-active inerter gets more controllability than the original VI device because it can switch the torque and motion transmitting routes between the device terminals and the flywheel in it. The frequency-domain analysis validates the versatile of the semi-active inerter, which can work in VD and VI modes. The test results of the semi-active MR inerter prototype are used to identify the device parameters, which are applied for the control simulation. The semi-active MR inerter in CMMR mode has the best torque tracking performance with a given test condition, and it has a 20.13% improvement than in the VD mode. Then, a seat suspension with the semi-active MR inerter is applied to validate the effectiveness of the device in vibration control. The results show that the vibration reduction of the seat suspension in the CMMR mode is 39.3% higher than in the VD mode, which indicates a significant improvement of ride comfort. The new concept of the semi-active device has excellent potential in vibration control and is promising in practical applications.

Application of metal rubber for semi-active vibration control of mechanical transmission systems

Semi-active vibro-acoustic control of vehicle transmission systems using a metal rubber-based isolator

Integrated Dynamic Characteristics and Application in Semi-Active Dynamic Absorber of Magneto-Rheological Fluids

Research on Improved Magnetorheological Damper for Wide-Band Vibration Control

Study on a new semi-active vibration isolation system

Multi-direction Vibration Isolation Via Transverse Isotropy Control of Metal Rubber

A controllable mechanical motion rectifier-based semi-active magnetorheological inerter for vibration control

Control and experimental study of 6-DOF vibration isolation platform with magnetorheological damper

A New Isolator for Vibration Control

Design and Vibration Characteristics Analysis of Magnetorheological Elastomer Isolators

Advances in Structural Vibration Control Application of Magneto-Rheological Visco-Elastomer

A New Semi-Active / Passive Isolator

Semi-Active Control for A Multi-Dimensional Vibration Isolator with Parallel Mechanism

Semi-Active Fuzzy Optimal Control of a Vehicular Multi-Dimensional vibration Isolator.

Semi-active fuzzy cooperative control of vehicle suspension with a magnetorheological damper

An Innovative Hardware Emulated Simple Passive Semi-Active Controller for Vibration Control of Mr Dampers

Performance evaluation of a novel semi-active absorption and isolation co-control strategy with magnetorheological seat suspension for commercial vehicle

Modeling of A New Semi-Active/Passive Magnetorheological Elastomer Isolator

Semi-active control of the electromagnetic negative stiffness mechanism in a double-layer vibration isolator

Active/passive vibration isolation with multi-axis transmission control: Analysis and experiment

Mechanism and Application of Semi-Active MR Dampers