Synthesis of WL.nZVI/ GAC adsorbent green for chromium removal from aqueous solutions: (Characterization, kinetics, isotherms, and thermodynamics)

Zeinab Emamgholiloo,Keivan Shayesteh,Farzad Zahmati
DOI: https://doi.org/10.1016/j.ces.2024.120209
IF: 4.7
2024-05-24
Chemical Engineering Science
Abstract:This paper aims to synthesize zero-valent iron green nanoparticles to remove chromium from aqueous solutions. A granular activated carbon base was used to solve the problem of nanoparticle agglomeration. This study produced zero-valent iron nanoparticles using walnut leaf extract and immobilization on granular activated carbon (WL.nZVI/ GAC). Then, the specifications of the nanocomposite were studied using FE-SEM, EDX, BET, FTIR, and XRD analysis. This study investigated the parameters affecting adsorption, such as pH, adsorbent dose, contact time, pollutant concentration, and temperature. The WL.nZVI/ GAC nanocomposite specifications showed that the nanoparticles are spherical, and the diameter of the iron nanoparticles immobilized on activated carbon was determined in the range of 16.77 to 27.72 nm. XRD results also indicated that the Wl.nZVI/ GAC adsorbent was amorphous. According to EDX analysis, the loaded iron content in WL.nZVI/ GAC was about 1.86 %. pH PZC for WL.nZVI/ GAC nanocomposites was determined in the range of 6.1; In other words, at pH less than 6.1, the adsorbent's surface charge is positive and can absorb the chromium existing in solution, which is in the form of chromate, well. The results of adsorption process optimization showed that the adsorption of Cr(VI) is optimal at pH = 4, contact time of 780 min, concentration of 80 ppm, and temperature of 298 K. Experimental studies showed that the chromium removal by adsorbent is strongly dependent on pH. The adsorption kinetics of chromium by WL.nZVI/ GAC adsorbent follow the Pseudo-second-order, and the adsorption isotherm follows the Langmuir model. The adsorption of Cr(VI) ions on the Wl.nZVI/ GAC adsorbent is a spontaneous and exothermic process.
engineering, chemical
What problem does this paper attempt to address?