Gas Generation Mechanism in Li‐Metal Batteries

Huajun Zhao,Jun Wang,Huaiyu Shao,Kang Xu,Yonghong Deng

DOI: https://doi.org/10.1002/eem2.12180

2021-04-05

Abstract:<p>Gas generation induced by parasitic reactions in lithium-metal batteries (LMB) has been regarded as one of the fundamental barriers to the reversibility of this battery chemistry, which occurs via the complex interplays among electrolytes, cathode, anode, and the decomposition species that travel across the cell. In this work, a novel in situ differential electrochemical mass spectrometry is constructed to differentiate the speciation and source of each gas product generated either during cycling or during storage in the presence of cathode chemistries of varying structure and nickel contents. It unambiguously excludes the trace moisture in electrolyte as the major source of hydrogen and convincingly identifies the layer-structured NCM cathode material as the source of instability that releases active oxygen from the lattice at high voltages when NCM experiences H2 → H3 phase transition, which in turn reacts with carbonate solvents, producing both CO₂ and proton at the cathode side. Such proton in solvated state travels across the cell and becomes the main source for hydrogen generated at the anode side. Mechanisms are proposed to account for these irreversible reactions, and two electrolyte additives based on phosphate structure are adopted to mitigate the gas generation based on the understanding of the above decomposition chemistries.</p>

materials science, multidisciplinary

What problem does this paper attempt to address?

### Problems Addressed by the Paper

This paper primarily explores the gas generation mechanisms in Lithium-Metal Batteries (LMBs) during charge-discharge cycles and storage. Specifically:

1. **Research Background**:
- The modern society's demand for rechargeable batteries with high energy density and long cycle life is increasing.
- Although Lithium-Ion Batteries (LIBs) dominate the market, their energy density limits the driving range of electric vehicles and the standby time of electronic devices.
- Lithium-Metal Batteries (LMBs), due to the theoretical specific capacity of lithium metal (3860 mAh/g) being much higher than graphite, are considered the most promising alternative to lithium-ion batteries.

2. **Main Challenges**:
- On the anode side, the reaction between lithium metal and the electrolyte leads to numerous side reactions and the generation of flammable hydrogen gas (H₂).
- On the cathode side, although nickel-rich layered oxides (such as LiNiₓMnᵧCo₁₋ₓ₋ᵧO₂, abbreviated as NCM) have a high theoretical capacity, their structural instability prevents full utilization of lithium.
- Nickel-rich layered oxides are prone to electrolyte oxidation, surface film formation, and transition metal dissolution at high voltages, thereby reducing the cycle life of the battery.

3. **Research Objectives**:
- By constructing a novel in situ differential electrochemical mass spectrometry (DEMS), distinguish the types and sources of gases generated by NCM cathode materials with different structures and nickel contents during charge-discharge cycles and storage.
- Reveal the specific mechanisms of gas generation, particularly the generation mechanisms of H₂ and CO₂.
- Propose effective mitigation strategies to reduce gas generation.

4. **Experimental Methods**:
- Construct an in situ DEMS device to analyze the gas generation of NCM-Li metal batteries with different Ni contents (including NCM811, NCM622, and NCM111) during charge-discharge cycles and storage.
- Use phosphate-based electrolyte additives (triethyl phosphate TEP and trifluoroethyl phosphate TTFP) to suppress gas generation.

Through the above research, the paper aims to reveal the specific mechanisms of gas generation in lithium-metal batteries and propose effective mitigation strategies to improve the safety and performance of lithium-metal batteries.