The Brewing Process and Microbial Diversity of Strong Flavour Chinese Spirits: a Review
Youqiang Xu,Baoguo Sun,Guangsen Fan,Teng Chen,Ke Xiong,Zhu Yu,Jinxin Li
DOI: https://doi.org/10.1002/jib.404
2017-01-01
Journal of the Institute of Brewing
Abstract:Journal of the Institute of BrewingVolume 123, Issue 1 p. 5-12 Review articleFree Access The brewing process and microbial diversity of strong flavour Chinese spirits: a review Youqiang Xu, Youqiang Xu Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaSearch for more papers by this authorBaoguo Sun, Baoguo Sun Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaSearch for more papers by this authorGuangsen Fan, Guangsen Fan Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaSearch for more papers by this authorChao Teng, Chao Teng Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaSearch for more papers by this authorKe Xiong, Ke Xiong Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaSearch for more papers by this authorYunping Zhu, Yunping Zhu Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaSearch for more papers by this authorJinlong Li, Jinlong Li Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaSearch for more papers by this authorXiuting Li, Corresponding Author Xiuting Li lixt@btbu.edu.cn Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaCorrespondence to: Li Xiuting, Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing 100048, China. E-mail: lixt@btbu.edu.cnSearch for more papers by this author Youqiang Xu, Youqiang Xu Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaSearch for more papers by this authorBaoguo Sun, Baoguo Sun Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaSearch for more papers by this authorGuangsen Fan, Guangsen Fan Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaSearch for more papers by this authorChao Teng, Chao Teng Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaSearch for more papers by this authorKe Xiong, Ke Xiong Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaSearch for more papers by this authorYunping Zhu, Yunping Zhu Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaSearch for more papers by this authorJinlong Li, Jinlong Li Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaSearch for more papers by this authorXiuting Li, Corresponding Author Xiuting Li lixt@btbu.edu.cn Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing, 100048 China School of Food and Chemical Engineering, Beijing Technology and Business University, Beijing, 100048 ChinaCorrespondence to: Li Xiuting, Beijing Advanced Innovation Center for Food Nutrition and Human Health, Beijing Technology and Business University, Beijing 100048, China. E-mail: lixt@btbu.edu.cnSearch for more papers by this author First published: 24 March 2017 https://doi.org/10.1002/jib.404Citations: 72AboutSectionsPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinkedInRedditWechat Abstract Chinese Baijiu (Chinese spirit or Chinese liquor) is one of the six major distilled spirits in the world, and is renowned overseas. Chinese Baijiu has a long history of more than 1000 years when people first begin to brew liquor using distillation. So far, Chinese Baijius have formed 12 types according to their flavour characteristics. The strong flavour Chinese spirit is regarded as one of the typical representatives, and occupies a > 70% market share in China. The liquor brewing process is under an open environment, with grains as the fermentation substrates, as well as Daqu as the saccharifying ferment. The brewing process is complex and impacted by multiple factors. Among the factors, the microorganisms have important influences on the brewing process and product quality of liquors. In the past decades, a series of research achievements have been made with strong flavour Chinese spirits. However, reviews related to this field are relatively few. In this paper, we have reviewed strong flavour Chinese spirits including the introduction, brewing process, microorganism diversity of Daqus, fermented grains and pit muds, and the application of microbes. Copyright © 2017 The Institute of Brewing & Distilling Introduction Alcoholic drinks are popular products worldwide. People from various countries prefer different kinds of alcoholic drinks, such as beer being popular in Germany and grape wine in France. Distilled liquor is a kind of alcoholic drink with high ethanol concentrations. Chinese Baijius (also named Chinese liquors or Chinese spirits) are some of the oldest distillates in the world 1. Compared with other distilled spirits such as brandy, gin, rum, vodka and whiskey, Chinese Baijius have wide-ranging ethanol contents ranging from 30 to 72% by volume (normally 40–55%) 2, 3. Although the trend today is towards a lower alcoholic strength 4, most Chinese Baijius have ethanol contents of 40–55%. The strong alcoholic beverage is normally consumed straight by Chinese people, and not mixed with fruit juice, soda, water or other liquids, which may be due to the divergence of cultures and customs compared with Western countries. Many areas can produce liquors in China, and Anhui, Guizhou, Henan, Jiangsu, Shandong, Shanxi and Sichuan provinces are the main regions 5. Liquor production enterprises in these areas produce >90% in total of Chinese Baijius 5. However, these areas have different regional environments. Raw materials and brewing processes also vary in different enterprises. As a result, the aroma profiles of the products are quite different. On the basis of flavour characteristics, Chinese Baijius can be classified into 12 types, including strong-flavour (SFCS), jiang-flavour, mild-flavour, rice-flavour, chi-flavour, drug-flavour, zhima-flavour, nong jiang-flavour, feng-flavour, te-flavour, heavy perfume and laobaigan-flavour Chinese spirits. Among these types of liquors, SFCS, jiang-flavour, mild-flavour and rice-flavour Chinese spirits are recognized as the four basic flavour types 1. The SFCS has won the approval of most Chinese people, and accounts for >70% of all the Chinese Baijius produced 6. The 12 types of Chinese Baijius are classified by the flavour characteristics (Fig. 1) 7. SFCS, also named strong-flavour Chinese Baijiu, Luzhou-flavour liquor or strong-flavour liquor, uses grains as the raw materials, and is produced by the processes of traditional solid-state fermentation, distillation, aging and blending, with the flavour of ethyl caproate as the main aroma style, and without addition of alcohol or other flavour and colour substances 8. The flavours and tastes of Chinese Baijius are always closely related to the geographical regions, and only enterprises in Guizhou, Jiangsu and Sichuan provinces can produce high-quality SFCS in early years. However, by flavour analysis, ethyl caproate was found to be the characteristic aroma component of SFCS 9, and Clostridium spp. can effectively synthesize caproic acid 10. This foundation ensures that many enterprises could produce SFCS after the 1970s in China 11. It also confirms the importance of microbes, and the promotion of technological improvements for liquor production. Figure 1Open in figure viewerPowerPoint The 12 types of Chinese Baijius and their flavour relationships 7. [Colour figure can be viewed at wileyonlinelibrary.com] The brewing process of SFCSs Daqu-making process Daqu is a saccharifying and fermenting agent with a significant impact on the flavours of the products 9. According to the maximum incubation temperatures, Daqu can be categorized into high, medium-high, medium and low temperature ones, and medium temperature Daqu is always used as the fermentation starter for brewing SFCS 12. Daqu is commonly made from wheat, barley and/or pea together in definite proportions, ground, mixed and shaped into bricks, then incubated and matured by solid-state fermentation 9. The raw materials of Daqu are rich in starch and other nutrients, which can be used as substrates for the growth of microbes. The raw materials of Daqu are commonly pressed in moulds of different sizes depending on the manufacturers, and placed in a room for solid-state fermentation. The Daqu-making process can be divided into a low-temperature stage, a high-temperature stage, an aroma-formation stage and a storage stage 13, 14. In the low-temperature stage, all kinds of microorganisms grow dramatically, and moulds are the dominant microbes. In the high-temperature stage, with the increase ointemperature and the decrease in water and oxygen, most moulds, yeasts and some non-thermophilic and aerobic bacteria are decreased. In contrast, thermophilic strains grow well, such as Bacillus spp. In the aroma-formation stage, with the growth and metabolism of microbes, the nutrients are consumed and the microbial secondary metabolites accumulate, many of which are the flavour compounds or precursors. In the storage stage, a large number of microbes are dead, and the abundance of microorganisms further reduces 13, 14. The maximum temperatures reach a range between 45 and 60°C during the process. Daqu contains a variety of microbes, including filamentous fungi, yeasts and bacteria 15. The microbes are responsible for the production of a series of enzymes, which can convert the raw materials into substrates for alcoholic fermentation and flavour formation 5. Grain fermentation process The brewing of SFCS has several basic characteristics 16. Medium temperature Daqu is the starter as mentioned above. Solid-state fermentation takes place in the mud pit. The fermented grains and the raw materials are mixed-steamed and mixed-heated in the same container. Parts of the fermented grains are utilized for the next generation of fermentation (Fig. 2). Figure 2Open in figure viewerPowerPoint The fermentation process of strong flavour Chinese spirits. The grains used for fermentation are first milled, cooked and mixed with rice husk as a fermentation aid 16. The moisture of the crushed grains is adjusted to 53–58% w/w by adding hot water 17, 18. Thereafter, the mixtures are cooled to 13–16°C by spreading, and blended with the Daqu powder. The mixture is fermented in a special fermentor called a ‘pit’, the inside of which is coated with a layer of mud made from clay, bean cake powder and spent grain, and called ‘pit mud’ 19. The pit mud is rich in microorganisms, especially bacteria. After putting the grain mixtures into the pit, people gradually squeeze out the air in the mixtures to create a facultative anaerobic condition, and subsequently cover them with cellar mud on the surface of the pit 20 (Fig. 3). Fermentation is typically performed under temperatures between 28 and 32°C, and lasts for about 2 months or longer in solid state. After fermentation, the liquor is distilled out with steaming and aged in sealed pottery jars. The aged liquor is diluted with water and blended to yield ethanol contents commonly of 40–55% v/v in final products. Figure 3Open in figure viewerPowerPoint The profile of the mud pit. [Colour figure can be viewed at wileyonlinelibrary.com] The mud pit is used as the fermentation reactor, which has a layer of mud inside (Fig. 3). Pits are suitable solid bioreactors for the brewing of SFCS. The microbial communities in the pit mud greatly affect the quality and yield of Chinese Baijius. The results of polymerase chain reaction–denaturing gradient gel electrophoresis (PCR-DGGE) reveal that the Clostridium strains are dominant in pit mud 21. Meanwhile, the abundance of prokaryotic 16S rRNA varies 22. Clostridium spp. could synthesize caproic acid, which is a precursor for formation of ethyl caproate, the key flavour component of SFCS 23. The fermented grains are mixed with raw materials and rice husk, and put into the steamer (a pot for steaming fermented grains). The heat has to be carefully controlled; a slow fire is used first for liquor steaming, and then the heat is increased to gelatinize the raw materials. This is called mixed-steaming and mixed-heating 17, 24. After fermentation, part of the fermented grains is mixed with a certain quantity of fresh raw materials and used for the next generation of fermentation after steaming. Part of the new raw materials is added together with part of the fermented grains during every generation of grain fermentation. The repeated use of fermented grains is another characteristic of brewing SFCS 17, 21. As mentioned above, SFCS has a complex brewing process. A series of uncontrolled factors could affect the process, including temperature, environment moisture, water and oxygen content in the grain mixture, pH, Daqu dosage, rice husk dosage and the special and unique microbial community 25. It is helpful to stabilize and perfect the production process and improve the quality by revealing the mechanism of liquor brewing. Among all the factors, microorganisms play an important role in the raw material transformation and flavour formation 11. Thus, the studies of the microorganisms are summarized as follows. The diversity of microorganisms Numerous microorganisms co-exist in the Daqus, fermented grains and pit muds, which greatly affects the quality of liquors. A series of complex biochemical reactions can be catalysed by these microorganisms, such as the decomposition of starches, proteins and lipids for the formation of sugars, amino acids and fatty acids 26, 27. Various kinds of flavour substances or precursors are generated, and transferred to alcohols, aldehydes, acids, ketones, esters and other aroma components, which are the important aroma chemicals related to the flavours and tastes of liquors 26, 27. Owing to the importance and complexity of the microbial ecological system, and the contribution to flavours, tastes and quality of Chinese Baijius, it is urgent and vital to undertake deep and systematic research on the diversity of the microorganisms, in order to reveal of the mechanism between microbial metabolism and the formation of flavour compounds of Chinese Baijius 11. Microbial diversity of Daqus Daqu is the fermentation starter for liquor brewing in China. Traditional medium temperature Daqu is prepared by inoculating and growing naturally originated moulds, yeasts and bacteria 3. As microbes in Daqu come from the natural environment, the microfloras depend mainly on experience, the weather and a series of geographical factors as well as the manufacturing processes. Therefore, microbial communities of Daqus from various SFCS-producing enterprises are diverse (Table 1). Table 1. The main kinds of microbes in different types of Daqus used for brewing of strong flavour Chinese spirits Jinshiyuan 52 Jiannanchun 52 Wuliangye 13, 30, 53 Luzhoulaojiao 34, 54, 55 Bacteria Bacillus thermoamylovorans, Lactobacillus brevis, Lactobacillus helveticus, Staphylococcus xylosus, Stenotrophomonas maltophilia, Thermoactinomyces sanguinis, Weissella cibaria Lactobacillus brevis, Lactobacillus fermentum, Lactobacillus helveticus, Lactobacillus panis, Staphylococcus xylosus, Stenotrophomonas maltophilia, Pseudomonas spp., Weissella cibaria Bacillus cereus, Bacillus subtilis, Bacillus spp., Lactobacillus acetotolerans, Lactobacillus manihotivorans, Lactobacillus panis Acetic acid bacteria, Bacillus spp., lactic acid bacteria Yeast Hanseniaspora guilliermondii, Saccharomyces cerevisiae, Saccharomyces exiguous, Saccharomycopsis fibuligera, Pichia anomala, Trichosporon asahii, Wickerhamomyces anomalus Candida tropicalis, Debaryomyces hansenii, Hanseniaspora guilliermondii, Issatchenkia orientalis, Saccharomyces cerevisiae, Saccharomycopsis fibuligera, Trichosporon asahii, Wickerhamomyces anomalus Saccharomyces cerevisiae, Candida tropicalis Candida spp., Citeromyces spp., Debaryomyces spp., Oosporidium spp., Pichia spp., Saccharomyces spp. Filamentous fungi Absidia blakesleeana, Aspergillus oryzae, Aspergillus terreus, Rhizomucor miehei Absidia blakesleeana, Aspergillus oryzae, Rhizomucor miehei Aspergillus oryzae, Aspergillus niger, Grotrichum candidum, Mucor spp., Monascus parpureus Absidia spp., Aspergillus spp., Monascus spp., Mucor spp., Penicillum spp. The manufacture of Daqu is carried out in an open environment. Various kinds of microbes can colonize on Daqu. During the process, the species and abundance of microbes change and form a complex micro-ecology system. Microorganisms in Daqu show a great variety. There are differences in the number, populations and dominant microorganisms in different parts of the Daqu 28. The moulds are mainly on the surface, and bacteria are enriched in the core region, while yeasts can be found in all parts of the Daqu but in a low abundance 28. It is difficult to determine the function of the microbes and the correlation among the microorganisms in the whole process. During the Daqu-making process, the microorganisms grow and produce enzymes, such as amylase, protease, cellulase, lipase and esterase (Fig. 4) 5. The addition of Daqu to the fermented grains therefore brings not only microorganisms, but also enzymes that could hydrolyse the raw materials to offer substrates for the growth of microbes. Figure 4Open in figure viewerPowerPoint The species in Daqus and their enzyme production 5. [Colour figure can be viewed at wileyonlinelibrary.com] Microbial diversity of fermented grains The microbes growing on fermented grains (also called ‘Zaopei’ or fermented lees) are considered to play key roles during the fermentation and to contribute to the flavours and tastes of the final products, which come from Daqu, pit mud, the raw materials and the fermentation environment 11. In essence, the fermentation process of SFCS is mainly the co-fermentation of the microorganisms. The growth and metabolism of microorganisms are influenced by the substrates, water, pH, temperature and oxygen during fermentation. Microorganisms grow under the complex micro-ecosystem and achieve dynamic balance through coordination and inhibition. They produce enzymes and chemicals which contribute to the products 27. The fungal and bacterial diversities were investigated by PCR-DGGE and a culture-dependent method 29, 30 (Table 2). Aspergillus, Eurotium, Issatchenkia and Talaromyces were the dominant communities during the fermentation. Lactococcus, Sporolactobacillus and Streptococcus were isolated by the culture-dependent method, while they were not detected by PCR-DGGE 29, 30. Table 2. Microbial communities of fermented grains by polymerase chain reaction–denaturing gradient gel electrophoresis (PCR-DGGE) and small-subunit rRNA (SSU rRNA) PCR-DGGE 29, 30 SSU rRNA 31 Bacteria Acetobacter, Arthrobacter, Bacillus, Clostridium, Erwinia, Granulicatella, Kozakia, Lactobacillus, Microbacterium, Shewanella, Staphylococcus Actobacter, Arthrobacter, Bacillus, Burkholderia, Clostridium, Corynebacterium, Curtobacterium, Lactobacillus, Leptotrichia, Methanocuuleus, Microbacterium, Pelobacter, Rhodoccous, Serratia, Staphylococcus, Streptococcus Fungi Aspergillus, Eurotium, Fomitopsis, Issatchenkia, Saccharomyces, Saccharomycopsis, Talaromyces, Torulaspora, Trichosporon, Zygosaccharomyces Aspergillus, Eurotium, Fomitopsis, Pichia, Saccharomyces, Saccharomycopsis, Talaromyces, Trichosporon, Zygosaccharomyces Small-subunit rRNA (SSU rRNA) culture-independent method was applied for the investigation of microbial community in the fermented grains on days 1, 7 and 60 31 (Table 2). Pichia, Saccharomycopsis and Talaromyces were dominant on the first day; the fungi Eurotium and the bacteria Burkholderia, Lactobacillus and Streptococcus were abundant on the seventh day; and only Burkholderia and Lactobacillus were found on all days 1, 7 and 60 31. The species difference between PCR-DGGE and SSU rRNA may be due to the divergence of samples as well as the analytical methods. The results also indicate the necessity of microbial community analysis by a combination of two or more technologies. Grain fermentation takes place in the mud pit, and the surface contacts with the environment other than the middle and bottom parts. The microbes in the environment may colonize the fermented cover lees, and affect the fermentation of grains. Li et al. studied the microbial diversity of the cover lees using SSU rRNA 20. They found that the microbial community contained Acetobacter, Aneurinibacillus, Arthrobacter, Bacillus, Clostridium, Corynebacterium, Eurotium, Issatchenkia, Lactobacillus, Methanoculleus, Microbacterium, Nocardia, Saccharomyces, Saccharomycopsis, Sagenomella, Serratia, Staphylococcus, Streptococcus, Talaromyces, Trichosporon and Zygosaccharomyces. The dominant strains dynamically changed during the fermentation process (Table 3). Table 3. The dominant species of the fermented cover lees during grain fermentation 20 Day 1 Day 7 Day 60 Bacteria Lactobacillus, Staphylococcus Bacillus, Streptococcus Methanoculleus Fungi Issatchenkia, Saccharomycopsis, Talaromyces Issatchenkia, Saccharomyces, Talaromyces Eurotium, Talaromyces Different enterprises use diverse grains for fermentation; for example, Luzhoulaojiao Co. Ltd uses glutinous red sorghum, while Wuliangye Co. Ltd uses sorghum, rice, glutinous rice, wheat and corn as the raw materials. This divergence will also affect the microbial structures. Studies investigated the fungal divergence of single and multiple grains using PCR-DGGE. The results showed that the fungi communities were affected by the raw materials, and Candida, Debaryomyces and Pichia were dominant species in multiple-grain Zaopei while Candida was the principle fungi in single-grain Zaopei 32. The evaluation of microbial communities in fermented grains can give us a fundamental understanding of some species responsible for the quality of liquor, and also provide important resources for manual regulation of the fermenting processes and developing strategies to ensure the quality of the products. Microbial diversity of pit muds SFCS is obtained by the distillation of fermented grains, which are specifically fermented in a rectangular cellar constructed by the pit mud 33-35. During the production of SFCS, the pit mud of the cellar provides a comfortable habitat for microbial growth and metabolites, which are considered as important for the flavours and tastes of liquors 34. Therefore, pit mud, which is considered as one of the significant influencing factors, greatly affects the quality of SFCS 36, 37. Pit mud has beneficial effects for liquor production. First, it will help to provide a proper environment for fermentation, and the filtration and heat preservation performance of pit mud will greatly affect the fermentation process. Second, pit mud provides a habitat and domestication place for microorganisms. Third, the co-fermentation of microorganisms in pit mud will produce the aroma compounds that exist in the quality liquors. A large number of bacteria and archaea are domesticated in pit mud and form a unique flora. Although fungi are found in the pit mud, Gram-positive bacteria and anaerobic bacteria are dominant in the microbial community structures of different-aged pit muds according to the results of phospholipid-derived fatty acids analysis 6 (Table 4), and their metabolic products are the important aroma sources. Table 4. Microbial communities in the pit muds from cellars of different ages 6 20 years 50 years 100 years 200 years 300 years Bacteria Clostridia bacterium, Clostridium kluyveri, Clostridium ljungdahlii, Clostridium sp., Clostridium sartagoforme, Lactobacillus acetolerans, Lactobacillus alimentarius, Lysinibacillus sp., Pelospora sp., Ruminococcaceae bacterium, Ruminococcus sp., Sedimentibacter sp., Solibacillus silvestris, Sphingomonas mucosissima, Synergistetes bacterium Clostridium ljungdahlii, Clostridium sp., Lactobacillus acetolerans, Solibacillus silvestris, Sphingomonas mucosissima Clostridium ljungdahlii, Clostridium sp., Lactobacillus acetolerans, Ruminococcaceae bacterium, Sedimentibacter sp., Solibacillus silvestris, Solibacillus silvestris, Sphingomonas mucosissima Clostridium ljungdahlii, Clostridium sp., Lactobacillus acetolerans, Solibacillus silvestris, Sphingomonas mucosissima Clostridium kluyveri, Clostridium ljungdahlii, Clostridium sp., Lactobacillus acetolerans, Lactobacillus alimentarius, Ruminococcaceae bacterium, Solibacillus silvestris, Sphingomonas mucosissima, Synergistetes bacterium Fungi Kluyveromyces marxianus, Pichia anomala, Wickerhamomyces anomalus Kluyveromyces marxianus, Pichia anomala, Wickerhamomyces anomalus Kluyveromyces marxianus, Pichia anomala, Wickerhamomyces anomalus Kluyveromyces marxianus, Pichia anomala, Wickerhamomyces anomalus Kluyveromyces marxianus, Pichia anomala The community structures of archaea are diverse in various pit muds from different enterprises. However, for aged pit muds with more than 30 years, the archaea communities tend to be consistent, and mainly belong to the class of Methanobacteria. The closely relative microorganisms of all archaea 16S rRNA gene sequences fall into four genera, which are Methanobacterium, Methanobrevibacter, Methanoculleus and Methanosaeta, while the dominant archaea in samples from pit wall and pit bottom are similar (Table 5). Studies found that 37.1% eubacteria were affiliated with Clostridium sp. 38. The main aroma chemical of SFCS is ethyl caproate, which is produced by the caproic acid bacteria in the pit mud, and studies showed that the caproic acid bacteria belonged to the class of Clostridium sp. 10. It demonstrates positive symbiosis between Methanobacteria and Clostridium. The existence of Methanobacteria promotes the growth of Clostridium and will be beneficial for the liquor quality 39. This may also be the reason why aged mud pit produces high-quality liquors. Table 5. Bacterial communities of the pit mud at different parts 38 Pit wall Pit bottom Eubacteria Acinetobacter bouvetii, Acinetobacter sp., Bacillus methylotrophicus, Clostridium kluyveri, Clostridium ljungdahlii, Clostridium perfringens, Clostridium sp., Desulfotomaculum acetoxidans, Lactobacillus acetotolerans, Microbacterium testaceum, Porphyromonadaceae bacterium, Ruminococcus sp., Sedimentibacter hydroxybenzoicus, Synergistetes bacterium, Syntrophomonas zehnderi Bacillus amyloliquefaciens, Bacillus methylotrophicus, Bacillus subtilis, Clostridium cylindrosporum, Clostridium kluyveri, Clostridium ljungdahlii, Clostridium sp., Desulfotomaculum acetoxidans, Lactobacillus acetotolerans, Microbacterium testaceum, Rhodococcus fascians, Ruminococcus sp., Synergistetes bacterium, Syntrophomonas zehnderi, Virgibacillus sp. Archae