Abstract:Preparing samples and using ML to predict the bending behavior of sandwich beams with 3D‐printed core and flax‐reinforced composite face sheets. The primary objective of this study was to demonstrate the effectiveness of machine learning (ML) in predicting the mechanical behavior of sandwich structures. To achieve this, the study focused on assessing the bending response of environmentally friendly sandwich beams consisting of auxetic cores made from polylactic acid (PLA) and flax/epoxy composite face sheets reinforced with halloysite nanotubes (HNTs). Two ML techniques, specifically shallow neural networks (SNNs) and deep neural networks (DNNs), were employed to predict the specific energy absorption (SEA) and load‐deflection curves of these sandwich beams, respectively. The key design parameters under consideration included the HNT content in the face sheets and three geometric characteristics of the auxetic cells. Subsequently, 16 distinct specimens were meticulously designed for manufacturing, following Taguchi's experimental design principles. The cores of the structures were produced using 3D printing techniques, while the face sheets were meticulously fabricated using a hand layup process. These prepared specimens were then subjected to a three‐point bending test, and the collected data were employed to train the aforementioned neural networks. The outcomes of this study revealed that an SNN with a single hidden layer comprising seven neurons effectively predicted the SEA of the structures across various design parameter values. Additionally, the remarkable performance of a DNN, consisting of five hidden layers with 128, 64, 32, 16, and 8 units, respectively, was demonstrated by comparing its predicted results with the experimental results for a randomly designed sandwich beam. Highlights ML techniques were used for bending behavior of sandwich beams. The beams were made of flax/epoxy/HNT face sheets and 3D‐printed auxetic core. SNN was successfully employed to predict the SEA of the structures. DNN effectively predicted the load‐deflection curves. HNT content and auxetic cells significantly impacted the bending properties.

Inverse design of composite xylophone beams using finite element-based machine learning

Modal Analysis of Upright Piano Soundboards by Combining Finite Element Analysis and Computer-Aided Design

Vibration transmission characteristic prediction and structure inverse design of acoustic metamaterial beams based on deep learning

De novo composite design based on machine learning algorithm

Machine Learning-Enabled Inverse Design of Bioinspired Layered Composite Structures with Maximum Auxetic Performances

A Design and Fabrication Method for Wood-Inspired Composites by Micro X-Ray Computed Tomography and 3D Printing

Dynamic Behaviors of General Composite Beams Using Mixed Finite Elements

On the Natural Frequency and Vibration Mode of Composite Beam with Non-Uniform Cross-Section

Machine Learning Analysis of Data Obtained by Finite Element Method: A New Approach in Structural Design

Combinatorial design and flexural behavior of laminated bamboo–timber composite beams

Acoustic Metamaterial Inverse Design Based on Machine Learning Using Gauss–Bayesian Models

Verification and Validation of finite element models for laminated timber structures using solid, solid-beam and solid-shell approaches

Free vibration analysis and multi-objective optimization of lattice sandwich beams

Multi-scale design of composite material structures for maximizing fundamental natural frequency

Machine Learning-Assisted Shape Morphing Design for Soft Smart Beam

Machine learning for bending behavior of sandwich beams with 3D‐printed core and natural fiber‐reinforced composite face sheets

Machine learning as a new strategy for designing surface acoustic wave resonators

Experimental and nonlinear analytical of the flexural performance of timber-filled steel tubular composite beams

Analysis and design of laminated composite beams based on a refined higher-order theory

Free Vibration of Composite Sandwich Beam with Graded Corrugated Lattice Core

Accurate Prediction of Microstructure of Composites using Machine Learning