Abstract:This research mainly aims at the construction of the novel acceleration pedal, the brake pedal and the steering system by mechanical designs and mechatronics technologies, an approach of which is rarely seen in Taiwan. Three highlights can be addressed: 1. The original steering parts were removed with the fault tolerance design being implemented so that the basic steering function can still remain in case of the function failure of the control system. 2. A larger steering angle of the front wheels in response to a specific rotated angle of the steering wheel is devised when cornering or parking at low speed in interest of drivability, while a smaller one is designed at high speed in favor of driving stability. 3. The operating patterns of the throttle, brake, and steering wheel can be customized in accordance with various driving environments and drivers' requirements using the self-developed software. The implementation of a steer-by-wire system in the remote driving control for a go kart is described in this study. The mechatronic system is designed in order to support the conversion from human driving to autonomous driving for the go kart in the future. The go kart, using machine vision, is wirelessly controlled in the WiFi frequency bands. The steer-by-wire system was initially modeled as a standalone system for one wheel and subsequently developed into its complete form, including front wheel steering components, acceleration components, brake components, a microcontroller, drive circuit and digital to analog converter. The control output section delivers the commands to the subsystem controllers, relays and converters. The remote driving control of the go kart is activated when proper commands are sent by the vehicle control unit (VCU). All simulation and experiment results demonstrated that the control strategies of duel motors and the VCU control were successfully optimized. The feasibility study and performance evaluation of Taiwan's go karts will be conducted as an extension of this study in the near future.

STM32 Microcontroller-Based Voice-Activated Anti-Throttle Mis-Stepping System

ACC System's Throttle Control Strategy Based on Target Speed

Design and Implementation of Intelligent Car Controlled by Voice

Design of Voice Smart Car Control System Based on STC12C5A08S2

Double-Mode Vehicular Electronic Throttle for Driver Assistance Systems

Self-Tuning Backstepping Control with Kalman-like Filter for High-Precision Control of Automotive Electronic Throttle

Vehicle Adaptive Cruise Control Design with Optimal Switching Between Throttle and Brake

A safe driving system based-on STM32

Low-Cost Throttle-By-Wire-System Architecture For Two-Wheeler Vehicles

A Robust Adaptive Chattering-Free Sliding Mode Control Strategy for Automotive Electronic Throttle System via Genetic Algorithm

Design and Development of Vehicle Reversing Brake Assist System

Design of Intelligent Car Control System Based on STM32

Rapid Prototyping Control of Electronic Throttle Body

Adaptive Second-order Sliding Mode Control of Electrical Throttles Based on Online Zero-crossing Checking

Development of Throttle Control System for Automobile Engine

Adaptive Throttle Controller Design Based on a Nonlinear Vehicle Model

Automotive Steering System and Its Controller Design for Intelligent Vehicles

A model-tuned backstepping control approach for angle demand following of steer-by-wire system

An Infrared Obstacle Avoidance Car Based on STM32

Mechatronics and Remote Driving Control of the Drive-by-Wire for a Go Kart

Research on the Steering Torque Control for Intelligent Vehicles Co-Driving with the Penalty Factor of Human–Machine Intervention