Abstract:With improved treatment of coronary artery disease, more patients are surviving until heart failure occurs. This leads to an increase in patients needing devices for struggling with heart failure. Ventricular assist devices are known as the mainstay of these devices. This study aimed to design a centrifugal pump as a ventricular assist device. In order to design the pump, firstly, the geometrical parameters of the pump, including the gap distance, blade height, and position of the outlet relative to the blade, were investigated. Finally, the selected configuration, which had all the appropriate characteristics, both hydraulically and physiologically, was used for the rest of the study. The study of the blade, as the main component in energy transfer to the blood, in a centrifugal pump, has been considered in the present study. In this regard, the point-to-point design method, which is used in industrial applications, was implemented. The designer chooses the relationship between the blade angles at each radius in the point-to-point method. The present study selected logarithmic and second-order relations for designing the blade's profile. In total, 58 blades were examined in this study, which differed regarding blade inlet and outlet angles and the relationship between angle and radial position. ANSYS CFX 17.0 software was utilized to simulate blades' performances, and a benchmark pump provided by the US Food and Drug Administration (FDA) was used to validate the numerical simulations. Then, the selected impeller from the numerical investigation was manufactured, and its performance was compared experimentally with the FDA benchmark pump. A hydraulic test rig was also developed for experimental studies. The results showed that among the blades designed in this study, the blade with an input angle of 45° and an output angle of 55°, which is designed to implement a logarithmic relationship, has the best performance. The selected impeller configuration can increase the total head (at least by 20%) at different flow rates compared to the FDA pump.

Optimization of geometric indicators of a ventricular pump using computational fluid dynamics, surrogate model, response surface approximation, kriging and particle swarm optimization algorithm

Optimization of a centrifugal blood pump designed using an industrial method through experimental and numerical study

Multi-Objective Optimization of Multistage Centrifugal Pump Based on Surrogate Model

Optimization of a Centrifugal Pump to Improve Hydraulic Efficiency and Reduce Hydro-Induced Vibration

Geometric Optimization of an Extracorporeal Centrifugal Blood Pump with an Unshrouded Impeller Concerning Both Hydraulic Performance and Shear Stress

Performance improvement of the sanitary centrifugal pump through an integrated approach based on response surface methodology, multi-objective optimization and CFD

Comprehensive study on simulation, performance evaluation and optimization strategies for blood pumps

Multiobjective Optimization of Rotodynamic Blood Pumps: The Use Case of a Cavopulmonary Assist Device

Optimizing ventricular assist device rotor design parameters through computational fluid dynamics and design of experiments

Optimization of a Screw Centrifugal Blood Pump Based on Random Forest and Multi-Objective Gray Wolf Optimization Algorithm

Optimization of Guide Vane Airfoil Shape of Pump Turbine Based on SVM-MDMR Model

Optimization of pump transient energy characteristics based on response surface optimization model and computational fluid dynamics

Heuristic optimization of impeller sidewall gaps-based on the bees algorithm for a centrifugal blood pump by CFD

Optimization, Numerical, and Experimental Study of a Propeller Pump as Turbine

Design optimization of an axial blood pump with computational fluid dynamics.

Performance prediction and optimization of hydrogenation feed pump based on particle swarm optimization – least squares support vector regression surrogate model

Blood Pump Design Variations and Their Influence on Hydraulic Performance and Indicators of Hemocompatibility

Automatic optimization of centrifugal pump based on adaptive single-objective algorithm and computational fluid dynamics

Impeller Optimization and Computational Fluid Dynamics Analysis of Micro-Axial Blood Pumps

Machine learning based on computational fluid dynamics enables geometric design optimisation of the NeoVAD blades

On the Optimization of a Centrifugal Maglev Blood Pump Through Design Variations