Abstract:Unlike outdoor positioning, there is no unique solution to obtain the position of a person inside a building or in Global Navigation Satellite System (GNSS)-denied areas. Typical implementations indoor rely on dead reckoning or beacon-based positioning, but a robust estimation must combine several techniques to overcome their own drawbacks. In this paper, we present an indoor positioning system based on foot-mounted pedestrian dead reckoning (PDR) with an efficient map matching, received signal strength (RSS) measurements, and an improved motion model that includes the estimation of the turn rate bias. The system was implemented using a two-level structure with a low-level PDR filter and a high-level particle filter (PF) to include all the measurements. After studying the effect of the step displacement on the PFs proposed in the literature, we concluded that a new state with the turn rate bias (a nonobservable state in PDR) is needed to correctly estimate the error growth and, in the long term, correct the position and heading estimation. Additionally, the wall crossing detection of map matching was optimized as matrix operations, and a room grouping algorithm was proposed as a way to accelerate the process, achieving real-time execution with more than 100 000 particles in a building with more than 600 wall segments. We also include a basic path-loss model to use RSS measurements that allows a better initialization of the filter, fewer particles, and faster convergence, without the need for an extensive calibration. The inclusion of the map matching algorithm lowers the error level of the RSS-PDR positioning, from 1.9 to 0.75 m, 90% of the time. The system is tested in several trajectories to show the improvement in the estimated positioning, the time to convergence, and the required number of particles.

MMGraphSLAM: Autonomous indoor positioning based on millimeter Wave GraphSLAM

Robust Indoor Localization and Map Matching Algorithm with Visual SLAM

Online Multipedestrian Tracking Based on Fused Detections of Millimeter Wave Radar and Vision

Millimeter Wave Wireless Communication Assisted Three-Dimensional Simultaneous Localization and Mapping

Adaptive Multi-Pedestrian Tracking by Multi-Sensor: Track-to-Track Fusion Using Monocular 3D Detection and MMW Radar

A mmWave Radar SLAM Method in Subterranean Tunnel for Low Visibility and Degradation

The Millimeter-Wave Radar SLAM Assisted by the RCS Feature of the Target and IMU

waveSLAM: Empowering Accurate Indoor Mapping Using Off-the-Shelf Millimeter-wave Self-sensing

OGI-SLAM2: A Hybrid Map SLAM Framework Grounded in Inertial-Based SLAM

3-D Collaborative Occupancy Grid-Based Inertial SLAM Based on Switching Floor Event

A Pedestrian SLAM Scheme Grounded in Inertial-Based Map and Magnetic Field Map

Indoor Positioning Using Efficient Map Matching, RSS Measurements, and an Improved Motion Model

Environment-aware Multi-person Tracking in Indoor Environments with MmWave Radars

Radarize: Enhancing Radar SLAM with Generalizable Doppler-Based Odometry

2DLIW-SLAM:2D LiDAR-Inertial-Wheel Odometry with Real-Time Loop Closure

Pedestrian Trajectory Based Calibration for Multi-Radar Network

LoCal: An Automatic Location Attribute Calibration Approach for Large-Scale Deployment of mmWave-based Sensing Systems

Position Estimation and Calibration for High Precision Human Positioning and Tracking Using Millimeter-Wave Radar

Indoor positioning system based on inertial MEMS sensors: Design and realization

rWiFiSLAM: Effective WiFi Ranging based SLAM System in Ambient Environments

Integration and evaluation of SLAM-based backpack mobile mapping system