Abstract:Through melt‐extrusion and drawing, the scalable fabrication of thermoplastic liquid crystal elastomer fiber actuators is shown with synergistically contracting and rotating deformations accompanied by large actuation forces. Utilizing the thermoplastic behavior leads to a recyclable and programmable three‐ply helical twisted rope multiplying the actuation forces and unlocking the ability to reversibly open and lift a screw cap bottle. Untethered soft fiber actuators are advancing toward next‐generation artificial muscles, with rotating polymer fibers allowing controlled rotational deformations and contractions accompanied by torque and longitudinal forces. Current approaches, however, are based either on non‐recyclable and non‐reprogrammable thermosets, exhibit rotational deformations and torques with inadequate actuation performance, or involve intricate multistep processing and photopolymerization impeding scalable fabrication and manufacturing of millimeter‐thick fibers. Here, the melt‐extrusion and drawing of a 50 m long thermoplastic liquid crystal elastomer fiber with a ≈1.3 mm diameter on a large scale is reported. With the responsive thermoplastic material, rotating actuators are fabricated via easily exploited programming freedom resulting in large, reversible rotational deformations and torques. The actuation performance of the twisted fibers may be controlled by the programmed twisting density without complicated preparation steps or photocuring being required. The thermoplastic behavior enables fabrication of plied fibers, demonstrated as a triple helical twisted rope constructed from individual rotating fibers delivering up to three times as great rotational and longitudinal forces capable of reversibly opening and lifting a screw cap vial. Besides the programmability, the thermoplastic material employed lends itself to be completely reprocessed into other configurations with self‐healing properties in contrast to thermosets.

Melt‐Extruded Thermoplastic Liquid Crystal Elastomer Rotating Fiber Actuators

Self-winding liquid crystal elastomer fiber actuators with high degree of freedom and tunable actuation

Fast and Slow‐Twitch Actuation via Twisted Liquid Crystal Elastomer Fibers

Small-strain Folding of Semi-Rigid Elastomer Derives High-Performance 3D-Printable Soft Origami Actuators

Photodeformable Main-chain Crosslinked Liquid Crystal Polymer Fiber Actuators at Room Temperature

Scalable Functionalized Liquid Crystal Elastomer Fiber Soft Actuators with Multi-Stimulus Responses and Photoelectric Conversion

Braided Liquid Crystal Elastomer Fiber Actuator with Programmable Deformation for Artificial Muscles

Ultrarobust Actuator Comprising High-Strength Carbon Fibers and Commercially Available Polycarbonate with Multi-Stimulus Responses and Programmable Deformation

Bioinspired Liquid Crystalline Spinning Enables Scalable Fabrication of High-Performing Fibrous Artificial Muscles

Three-dimensional liquid crystal polymer actuators assembled by athermal photo-welding

Intrinsically Anisotropic Dielectric Elastomer Fiber Actuators

Nanostructured block copolymer muscles

Reversible Torsional Actuation of Hydrogel Filled Multifilament Fibre Actuator

Fiber-reinforced liquid crystalline elastomer composite actuators with multi-stimulus response properties and multi-directional morphing capabilities

Liquid Crystal Elastomer Hollow Fibers as Artificial Muscles with Large and Rapid Actuation Enabled by Thermal‐Pneumatic Enhanced Effect

High-cycle-life and High-Loading Copolymer Network with Potential Application As a Soft Actuator

Layered liquid crystal elastomer actuators

Vacuum Thermoforming of Optically Switchable Liquid Crystalline Elastomer Spherical Actuators

Fiber Actuators Based on Reversible Thermal Responsive Liquid Crystal Elastomer

High performance fiber-constrained plasticized PVC gel actuators for soft robotics

Shape‐programmable Liquid Crystalline Polyurethane‐based Multi‐mode Actuators Triggered by Light‐driven Molecular Motors