Abstract:With the acceleration of the urban development process and the rapid growth of China's population, the subway has become the first choice for people to travel, and the urban underground space has been continuously improved. The subway construction has become the focus of urban underground space development in the 21st century. During the construction of subway tunnels, the problem of surface settlement will inevitably be caused, and the problem of surface settlement will have a certain safety impact on the safe use of surface buildings. The impact of surface construction is predicted, so as to select the best construction technology and avoid the problem of surface subsidence to the greatest extent. On the basis of analyzing the principle of surface subsidence, this paper studies the optimal control strategy and process of subsidence in subway tunnel engineering. The research results of the article show the following. (1) The two sections of the pebble soil layer have basically the same subsidence trend. Among them, the first section has a larger settlement amplitude and both sides are steeper. The second section is mainly cobble clay soil. The pebble layer has good mechanical properties. If it can be well filled, its stability will be improved. The comparative analysis of the two sections shows that with the increase of the soil cover thickness, the maximum subsidence at the surface gradually decreases. The reason is that when the stratum loss is the same, the greater the soil cover thickness, the greater the settlement width. Sections 2 and 3 of a single silty clay have relatively close settlement laws, and the settlement changes on both sides of the tunnel are similar. (2) The surface subsidence caused by the excavation of the side hole accounts for more than 50% of the total surface subsidence, and the width of the settlement tank after the excavation of the side hole is increased by 8-10 meters compared with the excavation of the middle hole. (3) The prediction error of the BP neural network model proposed in this paper is the lowest among the four models, whether it is the prediction of the cumulative maximum surface subsidence or the location of the cumulative maximum surface subsidence, and the average relative error of the cumulative maximum surface subsidence is 3.27%, the root mean square error is 3.87, the average relative error of the location of the cumulative maximum surface subsidence is 7.96%, and the root mean square error is 21.06. In the prediction process of the cumulative maximum surface subsidence, the prediction error value of the Elman neural network is relatively large, and the GRNN generalized neural network and RBF neural network have no significant changes; in the process of predicting the position where the cumulative maximum surface subsidence occurs, the prediction error value of RBF neural network is maximum.

Machine learning-based identification of segment joint failure in underground tunnels

New Damage Identification Method for Operational Metro Tunnel Based on Perturbation Theory and Fuzzy Logic

Influence of adjacent shield tunneling construction on existing tunnel settlement: field monitoring and intelligent prediction

Image-based Concrete Crack Detection in Tunnels Using Deep Fully Convolutional Networks

3D reconstruction and automatic leakage defect quantification of metro tunnel based on SfM-Deep learning method

Research on Intelligent Detection and Segmentation of Rock Joints Based on Deep Learning

Prediction of tunnel mechanical behaviour using multi-task deep learning under the external condition

Shield machine position prediction and anomaly detection during tunnelling in loess region using ensemble and deep learning algorithms

Subway tunnel damage detection based on in-service train dynamic response, variational mode decomposition, convolutional neural networks and long short-term memory

Risk classification assessment and early warning of large deformation of soft rock in tunnels based on CNN-LSTM model

Diagnosing tunnel collapse sections based on TBM tunneling big data and deep learning: A case study on the Yinsong Project, China

Machine Learning in Conventional Tunnel Deformation in High In Situ Stress Regions

Analysis and Prediction of Subway Tunnel Surface Subsidence Based on Internet of Things Monitoring and BP Neural Network

A novel intelligent displacement prediction model of karst tunnels

Intelligent Early Warning System for Construction Safety of Excavations Adjacent to Existing Metro Tunnels

Intelligent decision method for stability assessment of shield tunnel based on multi-objective data mining

Investigation on the deformation mechanism of the full-section tunnel excavation in the complex geological environment based on the PSO-BP neural network

Prediction of lining upward movement during shield tunneling using machine learning algorithms and field monitoring data

Deformation and failure analysis of surrounding rock mass in deep buried tunnels subjected to excavation

The Construction and Application of a Deep Learning-Based Primary Support Deformation Prediction Model for Large Cross-Section Tunnels

Intelligent segmentation and quantification of tunnel lining cracks via computer vision