Abstract:Ceramic core is an essential component in the precise casting of hollow turbine blades, and the investigation on 3D printing of silica-based ceramic cores is crucial to the development of aviation industry; however, they are suffered from difficulty in high-temperature strength and structural anisotropy. In present work, silica-based ceramic cores were prepared via DLP stereolithography 3D printing, and the anisotropy management on microstructures and properties were explored based on the particle size of fused silica powders. In 3D printed ceramic cores with coarse powders, significant anisotropy was displayed exhibiting multilayer structure with large gaps in horizontal printing and uniform porous microstructure in the vertical direction, which was further explained by the particle deposition in printing. With finer silica powders, the uniformity in the microstructures was highly improved, attributed to the enhanced particle dispersion in ceramic slurries and promoted interlayer particle rearrangement during sintering. To evaluate the anisotropy in mechanical property, the ratio of vertical strength to horizontal strength (σV/σH) was proposed, which rose from 0.48 to 0.86 as the particle size decreased from 35 μm to 5 μm, suggesting enhanced mechanical uniformity. While the average particle size of silica powders was 5 μm, the flexure strengths of ceramic cores in different directions were up to 18.5 MPa and 16.3 MPa at 1540°C with σV/σH ratio of 0.88, which well satisfied the demands for the casting of turbine blades. This work inspires new guidance on the anisotropy management in ceramic cores prepared by 3D printing, and provides new technology for fabrication of silica-based ceramic cores with superior high temperature mechanical properties.

Development of thin-walled polymer glass beads reinforced 3D printed solid rocket motors

Ablation Characteristics Research in Solid Rocket Motor's Combustion Chamber Produced by 3D Printing

Research on the Safety of Long Term Storage Solid Rocket Motor with Debonded Layer

Rheological and Mechanical Characterization of 3D-Printable Solid Propellant Slurry

Anisotropy management on microstructure and mechanical property in 3D printing of silica-based ceramic cores

The impact of the glass microparticles features on the engineering response of isotactic polypropylene in material extrusion 3D printing

Processing and characterization of ablative composites used in rocket motors

Solid‐state shear milling method to prepare PA12/boron nitride thermal conductive composite powders and their selective laser sintering 3D‐printing

Effect of Polyamide-12 Material Compositions on Mechanical Properties and Surface Morphology of SLS 3D Printed Part

A detailed evaluation of surface, thermal, and flammable properties of polyamide 12/glass beads composites fabricated by multi jet fusion

Experimental Investigation of N2O-PMMA Lab-Scale Hybrid Rocket Motor

Optimal Process Parameters for FDM‐Based 3D Printing of Metal‐Polymer Mixtures with Low‐Temperature Powder Feeding

Development, Testing, and Thermoforming of Thermoplastics Reinforced with Surface-Modified Aramid Fibers for Cover of Electronic Parts in Small Unmanned Aerial Vehicles Using 3D-Printed Molds

Mechanical and Thermal Properties of Glass Reinforced Composites

Design, Production and Evaluation of 3D-Printed Mold Geometries for a Hybrid Rocket Engine

Enhanced high-temperature dimensional accuracy by fibers in silica ceramic cores prepared through vat photopolymerization 3D printing

Tribological Properties of Glass Bead-Filled Polyamide 12 Composite Manufactured by Selective Laser Sintering

Fabrication and mechanical properties of triply period minimal surface porous alumina ceramics based on Digital Light Processing 3D printing technology

New discovery of aluminium agglomeration in composite solid propellants based on microscopic heating system

Radiative properties of alumina/aluminum particles and influence on radiative heat transfer in solid rocket motor

In-situ Y3Al5O12 enhances comprehensive properties of alumina-based ceramic cores by vat photopolymerization 3D printing