Abstract:Harvesting energy from ambient moisture and natural water sources is currently of great interest due to the need for standalone self-powered nano/micro-systems. In this work, we report on the development of a cost-effective nanogenerator based on a carbon paper-Al2O3 nanoparticle layer-carbon paper (CAC) sandwich structure, where the 3D Al2O3 layer is deposited via vacuum filtration. This type of device can produce an open-circuit voltage (UOC) of up to 4 V and a short-circuit current (ISC) of ∼18 μA with only an 8 μL water droplet applied. To our knowledge, this is the highest voltage yet reported from a single moisture/water-induced electricity nanogenerator using solid oxides and carbon-based materials. A remarkable output power of 14.8 μW can be reached with an optimized resistive load. An LED with a working voltage of 3–3.2 V can operate for a short time with the power from a single CAC device exposed to one 8 μL water droplet. Furthermore, a CAC generator adsorbing as little as 2 μL water droplets every 3 min can also give a UOC of 3.63 V. We show that CAC devices provide a robust electrical output over more than 200 wet–dry cycles without any deterioration in performance. These units demonstrate much promise as cost-effective electricity generators for harvesting energy from natural sources like rainwater, tap water, snow runoff, and dew. The response time of CAC devices can be as fast as 10–100 ms, making them ideal for applications as self-powered water detectors. The generation of power in this device arises from the streaming current. To assist in the optimization of these devices, we have analyzed how their response is related to such factors as layer thickness, time interval between application of water droplets, and the volume of each water droplet.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04290?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04290</a>.Photo of the as-fabricated CAC device; relationship between the average layer thickness and weight of Al2O3 NPs; characterizations of Al2O3 NPs and the carbon electrode; UOC and ISC responses of devices with different Al2O3 layer thicknesses, time intervals between water droplets, and different water volumes of each water droplet; time dependence of the voltage response of the CAC nanogenerators with different thicknesses obtained using a fast oscilloscope; time dependence of the output voltage when powering an LED; UOC response when the Al2O3 layer was replaced with a filter paper and print paper and when deionized water was replaced by ethanol, acetone, or isopropanol; schematic of the overlapping EDL between two adjacent Al2O3 NPs; schematic of the water diffusion in an Al2O3 layer at various layer thicknesses and water volumes and the corresponding verification from a 1.27 mm-thick CAC generator; and schematic of the mechanism for water diffusion in an Al2O3 layer for different time intervals between applied water droplets (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04290/suppl_file/am1c04290_si_001.pdf">PDF</a>)Illustration of powering a commercial LED light with one single device when an 8 μL water droplet is applied (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04290/suppl_file/am1c04290_si_002.mov">MOV</a>)This article has not yet been cited by other publications.

Ceramic Nanofiber-Based Water-Induced Electric Generator

Freestanding silicon nanowires mesh for efficient electricity generation from evaporation-induced water capillary flow

Harvesting Energy Via Water Movement and Surface Ionics in Microfibrous Ceramic Wools

Enhancing energy extraction from water microdroplets through synergistic electrokinetic and galvanic effects

Direct Current Electricity Generation from Dynamic Polarized Water–Semiconductor Interface

Direct-Current Generator Based on Dynamic Water-Semiconductor Junction with Polarized Water as Moving Dielectric Medium

A one-dimensional fluidic nanogenerator with a high power conversion efficiency.

Rational Design of Oriented Glass Fibers Within Nano-Porous SiO2 Films to Improve Evaporation-Induced Hydroelectric Generation

A fabric-based hydrovoltaic electricity generator with multi-component carbon black for sustainable energy output

Flexible, self-cleaning, and high-performance ceramic nanofiber-based moist-electric generator enabled by interfacial engineering

A Fiber Fluidic Nanogenerator Made from Aligned Carbon Nanotubes Composited with Transition Metal Oxide

Generating Electricity from Water Through Carbon Nanomaterials

Harvesting Water‐Evaporation‐Induced Electricity Based on Liquid–Solid Triboelectric Nanogenerator

A Simple High Power, Fast Response Streaming Potential/Current-Based Electric Nanogenerator Using a Layer of Al2O3 Nanoparticles.

The role of electrochemistry and surface chemistry in water-induced electricity generation from electrically conductive solids

Harvesting Water Wave Energy by Asymmetric Screening of Electrostatic Charges on A Nanostructured Hydrophobic Thin-Film Surface

Polarized Water Driven Dynamic PN Junction-Based Direct-Current Generator

Asymmetrical Electrode Modified by Metal Oxide Nanoparticles for Power Generation Devices from Water Evaporation

Generating Direct Current Electricity from Dripping or Flowing Ionic Water

Microporous polymer membrane assisted water induced electricity generation based on triboelectrification and electrostatic induction

A Simple High Power, Fast Response Streaming Potential/Current-Based Electric Nanogenerator Using a Layer of Al 2 O 3 Nanoparticles