Abstract:State of Charge (SoC) is essential in a smart Battery Management System (BMS). Traditional SoC estimation methods consider the lithium battery cell as an isothermal body simplistically, which is not accurate. Due to the heat conduction and convection, the temperature distribution along the radius is nonuniform, which means the battery model parameters subject to temperature are not identical radially. This paper proposed a modified electrochemical-distributed thermal coupled model (MEDTM) for improving the accuracy of SoC estimation. The distributed thermal model is employed to design a robust H-infinity temperature observer for the estimation of the radial temperature distribution of battery cell, where a radial discretized method is used for the realization of the observer design. Based on the observed temperature, a SoC observer is developed with the backstepping method. Finally, experiments and simulation are implemented. The two constant discharging experiments indicate that MEDTM is more accurate than the single particle model with surface temperature (SPMST), and it can generate reliable temperature prediction. A comparative simulation and a constant discharging experiment verify the H-infinity temperature observer can obtain a more accurate estimation of the battery cell's temperature than the luenberger observer, and the H-infinity temperature observer has an estimation error of 0.3 K below. Then, through a constant discharging experiment and a simulation with UDDS current, the proposed SoC observer is verified to accurately estimate the SoC by comparing with the true SoC, where the estimated error of SoC under the two cases is below 1.5% and below 0.4%, respectively. Therefore, the proposed SoC observer also has good performance.

An improved coulomb counting method based on dual open‐circuit voltage and real‐time evaluation of battery dischargeable capacity considering temperature and battery aging

Electrochemical-distributed Thermal Coupled Model-Based State of Charge Estimation for Cylindrical Lithium-Ion Batteries

Aging of nickel-cobalt-aluminum lithium-ion battery in different SOC intervals

A novel practical state of charge estimation method: an adaptive improved ampere‐hour method based on composite correction factor

A Combined State of Charge Estimation Method for Lithium-Ion Batteries Used in a Wide Ambient Temperature Range

A Data-Driven Coulomb Counting Method for State of Charge Calibration and Estimation of Lithium-Ion Battery

Co-Estimation of State-of-Charge and State-of-Health for Lithium-Ion Batteries Considering Temperature and Ageing

Experimental investigation on the characteristics of coulombic efficiency of lithium-ion batteries considering different influencing factors

Enhanced Coulomb Counting Method for State-of-Charge Estimation of Lithium-ion Batteries Based on Peukert's Law and Coulombic Efficiency

Advances in the Study of Techniques to Determine the Lithium-Ion Battery's State of Charge

State of Health Estimation of Lithium-Ion Batteries Based on Dual Charging State

Implementation of an Improved Coulomb-Counting Algorithm Based on a Piecewise SOC-OCV Relationship for SOC Estimation of Li-IonBattery

Joint state‐of‐charge and state‐of‐health estimation for lithium‐ion batteries based on improved Lebesgue‐sampling and division of aging stage

Improved Multiple Feature-Electrochemical Thermal Coupling Modeling of Lithium-Ion Batteries at Low-Temperature with Real-Time Coefficient Correction

Parameter Updating Method of a Simplified First Principles-Thermal Coupling Model for Lithium-Ion Batteries

A multi time-scale framework for state-of-charge and capacity estimation of lithium-ion battery under optimal operating temperature range

Hybrid State-of-Charge Estimation for Primary Battery Powered Sensor Nodes

A rapid online calculation method for state of health of lithium-ion battery based on coulomb counting method and differential voltage analysis

Research on Co-Estimation Algorithm of SOC and SOH for Lithium-Ion Batteries in Electric Vehicles

State of Charge Estimation for Pulse Discharge of a LiFePO4 Battery by a Revised Ah Counting

A combined state-of-charge estimation method for lithium-ion battery using an improved BGRU network and UKF