Kinematics of two-wheeler cyclists toward head-ground contact after vehicle collisions

Ao Liu,Bingbing Nie,Yu Liu,Guibing Li
DOI: https://doi.org/10.1177/09544062241270629
2024-09-03
Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Ground contact is the main source for head injuries of two-wheeler (TW) cyclists in vehicle collision accidents, and there is still a lack of understanding of TW cyclist ground impact kinematics. The purpose of the current study is therefore to investigate the kinematics of TW cyclists toward head-ground contact after vehicle collisions via multi-body modeling of vehicle-to-TW crashes under different scenarios. The results indicate that: a lower relative height of pelvis to vehicle bonnet leading edge and vehicle impact speed are more likely to induce a forward landing kinematics to TW cyclists, while higher values of these parameters are generally associated with the backward rolling or soaring movement; TW cyclists are more likely to drop to the side of the vehicle when the TW is moving or with a large offset distance from the center line of the struck vehicle; the head-first ground contact configuration is generally associated with shorter bicyclists in sedan impacts, bicyclists in MPV crashes and all TW cyclists in the crashes with a high vehicle impact speed (>30 km/h); the head-ground contact velocity of TW cyclists is significantly higher in the rear-end dropping cases, and shows relatively high correlation to vehicle impact speed but low correlation to TW moving speed; the head-ground contact velocity of TW cyclists is strongly affected by the body motion before head-ground impact, and head-first contacts could have an either low or high ground contact velocity. The findings may provide preliminary reference for future strategies of TW cyclist ground injury prevention.
engineering, mechanical
What problem does this paper attempt to address?