Application of Coupled Battery Model of Thermal and Electrical Equivalent Circuits to Realize Long-Life Battery Energy Storage System

Atsumi Kondo,Yoshimitsu Itou

DOI: https://doi.org/10.1109/ITC-CSCC62988.2024.10628257

2024-07-02

Abstract:This paper introduces Battery Management System (BMS), which is the core function of BESS (Battery Energy Storage System) for microgrid demand adjustment and power storage functions. To obtain long-life BESS, battery degradation estimation should be performed, and appropriate cooling method for the end-of-life performance should be selected. In the limited design and development periods, simulation models with short calculating time and practical accuracy are required. This paper proposes a coupled model of Electrical equivalent Circuit Model (ECM) which simulates battery degradation, and a thermal circuit model which simulates heat transfer in modules to select appropriate cooling methods. By representing the anisotropic thermal conductivity within the battery cell and the heat transfer around the battery module as thermal resistances and composing the thermal resistances corresponding to the components within the battery module, it succeeds to reduce the model size and calculation time. In this proposed model, the number of required function blocks has been reduced by 98.6 % compared to the number of conventional battery module model on MathWorks Simulink and Simscape. The calculation time is also reduced by 98.9 % of the conventional battery module model under the same Personal Computer environment. In the verification of proposed model, with the test current operational pattern in which the RMS C rate is 1.6 (C), the State of Charge (SOC) is ranged from 60 % to 90 %, and is repeated for 1,000 days, the maximum error rate between the measured and simulated State of Health Resistance (SOHR) with this model is 5.0 %

Engineering,Environmental Science