Abstract:There is growing demand for high-power devices, wide bandgap SiC and GaN semiconductor materials in semiconductor market, and a drive to integrate die attach materials that can replace lead-containing solders. However, epoxy-based and solder materials face challenges to meet high thermal conductivity and survive elevated working temperatures. Pressure-assisted silver sintering has overcome these challenges, but downsides of pressure-assisted silver sintering are that it requires special equipment and for some applications, packages are unable to withstand the pressure required to facilitate sintering. Pressureless sintering materials could be processed using the same equipment as traditional die attach adhesives. It develops strong metal bonds to substrates, providing high thermal conductivity and withstanding high temperatures. However, compared to pressure-assisted sintering, pressureless materials may have difficulties to form a dense bondline structure if the formulation design is not optimized. Moreover, once the sintered structure is built during cure, further bondline reduction may induce additional stress. Therefore, it is critical that the pressureless sintering material’s mechanical properties are formulated to effectively manage stress and pass all reliability testing – especially for automotive packages. This paper will present the findings from a study that evaluated the impact of various formulation components – such as silver packing and resin chemistry – on the mechanical properties and interfacial bonding of pressureless sintering die attach adhesives. The effect on in-package reliability performance was also investigated to better understand material properties that can pass reliability testing while maintaining high thermal and electrical conductivity adhesive requirements.

Mechanical properties and microstructure of large-area diamond/silicon bonds formed by pressure-assisted silver sintering for thermal management

High-Pressure-Assisted Large-Area (>2400 mm2) Sintered-Silver Substrate Bonding for SiC Power Module Packaging

Sintering bonding process with Ag nanoparticle paste and joint properties in high temperature environment

Enhancing Semiconductor Package Reliability through Mechanical Property Optimization of Pressureless Sintering Die Attach Adhesives

High Electrical and Thermal Conductivity of Nano-Ag Paste for Power Electronic Applications

Microstructural and Mechanical Evolution of Silver Sintering Die Attach for SiC Power Devices During High Temperature Applications

Sintering mechanisms and mechanical properties of joints bonded using silver nanoparticles for electronic packaging applications

Enhanced pressureless bonding by Tin Doped Silver Paste at low sintering temperature

Low-Temperature Sintering of Nanoscale Silver Pastes for High-Performance and Highly-Reliable Device Interconnection

Effect of heating rate on bonding strength of pressure-free sintered nanosilver joint

Bonding of Cu to Cu bulks through the low temperature sintering of Ag nanoparticle paste

High reliable and high bonding strength of silver sintered joints on copper surfaces by pressure sintering under air atmosphere

Mechanical Properties and Microstructure of Low Temperature Sintered Joints Using Organic-Free Silver Nanostructured Film for Die Attachment of SiC Power Electronics

Low Temperature Sintering-Bonding Through In-Situ Formation of Ag Nanoparticles Using Micro-Scaled Ag_2O Composite Paste

Micron-sized Ag flake particles direct die bonding on electroless Ni–P-finished DBC substrate: low-temperature pressure-free sintering, bonding mechanism and high-temperature aging reliability

Room temperature bonding of diamond/Si with Mo/Au interlayers in atmospheric air

Low Temperature Sintering of Silver Nanoparticle Paste for Electronic Packaging

Low-Temperature Sintering with Nano-Silver Paste in Die-Attached Interconnection

Bonding below 150°C Using Nano-Ag Film for Power Electronics Packaging

Development of Ag@Si composite sinter joining with ultra-high resistance to thermal shock test for SiC power device: Experiment validation and numerical simulation

Low-Temperature Bonding for Heterogeneous Integration of Silicon Chips with Nanocrystalline Diamond Films