Abstract:Replacing liquid electrolytes with solid ionic conductors attracts increasing attention due to the potential of improved battery safety. Solid-state batteries show potential for further increased energy/power density by eliminating the use of packaging accessories for unit cells. Sulfide- and halide-based ceramic ionic conductors exhibit comparable ionic conductivity with liquid electrolytes. These materials, however, are inherently brittle, making them unfavorable for applications. Here, we report a mechanically enhanced composite Na+ conductor that contains 92.5 wt% of sodium thioantimonate (Na3SbS4, NSS) and 7.5 wt% of sodium carboxymethylcellulose (CMC); the latter serves as the binder and an electrochemically inert encapsulation layer. The ceramic and binder constituents were integrated at the particle level, providing ceramic NSS-level Na+ conductivity in the NSS-CMC composite, the more than five-fold decrease of electrolyte thickness obtained in NSS-CMC composite electrolytes provided a five-fold increase in Na+ conductance compared to NSS ceramic pellets. Resulting from the CMC encapsulation, this NSS-CMC composite shows increased moisture resistivity and electrochemical stability, which significantly promotes the cycling performance of NSS- based solid-state batteries, and improves ductility of the material. This work demonstrates a well-controlled, orthogonal process of ceramic-rich, composite electrolyte processing – independent streams for ceramic particle formation along and binder encapsulation in a solvent-assisted environment. This work provides insights into the interplay among the solvent, the polymeric binder, and the ceramic particles in composite electrolyte synthesis, and implies the critical importance of identifying the appropriate solvent/binder system for the precise control of this complicated process. Finally, the work also provides valuable insights into the potential of designing mechanically tailorable battery components via fundamental understanding of the effect of the constituents on the overall composite ductility.

Dual Aliovalent Ions doped NASICON Ceramic Filler embedded in PEO-NaTFSI Polymer Matrix for High-Performance Solid-state Sodium-ion Battery

Ionic Liquid Reinforced NaSICON-type Oxide Electrolyte Films Enabling Solid State Conversion Metal Fluoride-Lithium Batteries

Investigation of Solid Polymer Electrolytes for NASICON-Type Solid-State Symmetric Sodium-Ion Battery

Flexible composite solid electrolyte with 80 wt% Na<sub>3.4</sub>Zr<sub>1.9</sub>Zn<sub>0.</sub><sub>1</sub>Si<sub>2</sub ><sub>.</sub><sub>2</sub>P<sub>0</sub><sub>.</sub><sub>8</sub>O<sub>12</ sub> for solid-state sodium batteries

Effect of NASCION‐Type ceramic dispersion in PAN/PVA‐based blend polymer electrolyte: A structural, thermal, and electrical study

Quasi-Solid-State Na-O2 Battery with Composite Polymer Electrolyte

Interface Ionic/Electronic Redistribution Driven by Conversion‐Alloy Reaction for High‐Performance Solid‐State Sodium Batteries

Recent advances in NASICON-type oxide electrolytes for solid-state sodium-ion rechargeable batteries

A hybrid solid electrolyte for solid-state sodium ion batteries with good cycle performance

High performance NASICON ceramic electrolytes produced by tape-casting and low temperature hot-pressing: Towards sustainable all-solid-state sodium batteries operating at room temperature

Na3Zr2Si2PO12‐polymer composite electrolyte for solid state sodium batteries

Dynamic Electrode-Electrolyte Intermixing in Solid-State Sodium Nano-Batteries

Si3N4-Assisted Densification Sintering of Na3Zr2Si2PO12 Ceramic Electrolyte toward Solid-State Sodium Metal Batteries

Ionic Conductivity Analysis of NASICON Solid Electrolyte Coated with Polyvinyl-Based Polymers

A Cellulose Encapsulated Composite Electrolyte Design: Towards Chemically and Mechanically Enhanced Solid-sodium Batteries

NaSbF4 Nanoparticles As Solid-State Electrolytes in Sodium-Iodine Batteries: Sodium Ion Transport Via Conversion Reaction and Shuttle Effect Retarded by Fluoride

Pore‐Filling Induced Solid Electrolyte Failure of Ti‐Doped Na3Zr2Si2PO12 Characterized by operando Synchrotron X‐Ray Tomography

Pristine NASICON Electrolyte: A High Ionic Conductivity and Enhanced Dendrite Resistance Through Zirconia (ZrO2) Impurity-free Solid-Electrolyte Design

Highly Conductive Poly(ethylene oxide)-Based Composite Polymer Electrolyte for Sodium Battery Applications

Sodium 4-styrenesulfonyl(trifluoromethanesulfonyl)imide-based Single-Ion Conducting Polymer Electrolyte Incorporating Molecular Transporters for Quasi-Solid-State Sodium Batteries

Designing a Novel Electrolyte Na3.2Hf2Si2.2P0.8O11.85F0.3 for All‐Solid‐State Na‐O2 Batteries