Abstract:In view of the fact that dynamic stall models in the wind energy industry such as ONERA model, Beddoes–Leishman model, and Snel model are mostly semi‐empirical models, and the determination of empirical time constants has a great influence on the model accuracy. To optimize the time constant in dynamic stall model and improve the prediction accuracy of unsteady aerodynamics, the influence of boundary layer and pressure lag on the unsteady performance of the S809 airfoil under 2D flow conditions is explored using a simple semi‐empirical dynamic stall engineering model. The proposed model consists of four first‐order differential equations accounting for attached flow and dynamic separation flow of trailing edge based on the Theodorsen theory. A validation is carried out by the wind tunnel experiment in the Key Laboratory of Wind and Solar Energy Utilization Technology of the Ministry of Education at Inner Mongolia University of Technology. The main conclusions are as follows. The time constants for lag in pressure and boundary layer both have a great influence on the unsteady lift coefficient. When the mean angle of attack is relatively small and the airflow is between the attached flow and the separated flow, appropriately reducing the time constant can make the prediction results closer to the experimental values. When the mean angle of attack is relatively large and the airflow is in condition of fully separated flow, the time constant value can be appropriately increased. The influence of pressure lag and boundary layer lag on the unsteady drag coefficient is not significant.

Aerodynamic modeling of wind turbine airfoil concerning dynamic stall and Gurney flap

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

Influence of Relative Thickness on Static and Dynamic Stall Characteristics and Prediction of Airfoils

Deep Learning Based Fast Prediction and Optimization of Aerodynamic Performance for a Propeller with Gurney Flap

An improved dynamic stall model and its effect on wind turbine fatigue load prediction

Influence of boundary layer and pressure lag on unsteady aerodynamics of airfoil based on a simple semi‐empirical dynamic stall engineering model

NUMERICAL SIMULATION OF AERODYNAMIC LOAD CONTROL FOR BLADE AIRFOIL OF WIND TURBINE USING GURNEY FLAP

Unsteady Aerodynamic Force Analysis of Wind Turbine Airfoil

Transient aerodynamic load prediction of horizontal axis wind turbine based on the beddoes-leishman model

Unsteady Aerodynamic Prediction for Dynamic Stall of Wind Turbine Airfoils with the Reduced Order Modeling

Dynamic Stall Modeling of Wind Turbine Blade Sections Based on a Data-Knowledge Fusion Method

DYNAMIC STALL CHARACTERISTIC AND AERODYNAMIC PERFORMANCE PREDICTION FOR BLADE OF VAWT

Impacts of dynamic stall on engineering model predictions of wind turbines loads under design load cases

Impact of dynamic stall model tailoring on wind turbine loads and performance prediction

Numerical Simulation of the Flow Control Using Gurney Flaps for a Wind Turbine

Aeroelastic vibration analysis of wind turbine blade with Gurney flap

Development and Validation of the IAG Dynamic Stall Model in State-Space Representation for Wind Turbine Airfoils

Airfoil Dynamic Stall Research of Wind Turbine

Parametric Research and Aerodynamic Performance Analysis of Wind Turbine Airfoil with Added Flap

Numerical Simulation of a Wind Turbine Airfoil: Dynamic Stall and Comparison with Experiments

Numerical investigation of flow control on performance enhancing by mounting Gurney flaps of a large horizontal wind turbines