Abstract:Author(s): Alvarado, Judith Elizabeth | Advisor(s): Meng, Ying Shirley | Abstract: The current commercial lithium ion battery utilizes “host-guest” electrodes that allow for the intercalation of lithium between the crystal lattice of the anode and cathode materials. The lithium ions are transported through the electrolyte medium during the charge/discharge process, Given their success, lithium ion batteries have now penetrated the electric vehicle market and large scale grid storage, which require batteries with much higher energy densities. To meet this demand, alternative anode and cathode chemistries are required. Consequently, this will put high strain on the electrolyte which will decompose at both low and high potentials to form a passivation layer known as the solid electrolyte interphase (SEI). Herein, the fundamental reduction mechanism of fluoroethylene carbonate (FEC) is investigated as an additive for conventional electrolytes to improve the SEI formation on various silicon anodes using a series of advanced spectroscopic and microscopic techniques. For the first time, the direct visualization of the SEI generated on the silicon nanoparticle is investigated by scanning electron microscopy and its chemical composition by electron energy loss spectroscopy. The SEI is further investigated on lithium metal anode. Highly concentrated bisalt ether electrolytes form a SEI that is dominated by salt decomposition rather than solvent decomposition, which enables high lithium metal cycling efficiencies. At high potentials the electrolyte oxidizes on the cathode to form the cathode electrolyte interphase (CEI). With the discovery of 5V cathode materials, a new electrolyte is required. Therefore, sulfone based electrolytes are studied as potential high voltage electrolyte. Combined with lithium bis(fluorosulfonyl) imide, this solvent-salt synergy addresses the traditional performance issues that develop at the interface of high voltage cathodes. The factors that affect the cycling performance of cathode materials for lithium ion batteries are also seen in sodium ion batteries. Atomic layer deposition (ALD) is widely used to improve the cycling performance, coulombic efficiency of batteries, and to maintain electrode integrity for LIBs. Therefore, this approach is used to understand the effect of Al2O3 ALD coating on P2-Na2/3Ni1/3Mn2/3O2 cathodes, which lowers the cathode impedance and improves particle morphology after cycling. Improving the electrode-electrolyte interface is critical to the development of next generation high density energy storage systems.

Revealing Epitaxial Deposition in Alkali Metal Batteries

In Situ Atomic-Scale Imaging of Electrochemical Lithiation in Silicon.

Epitaxial Deposition of Zn (002) for Stable Zinc Metal Anodes

Imaging the microstructure of lithium and sodium metal in anode-free solid-state batteries using electron backscatter diffraction

Gently does it!: in situ preparation of alkali metal-solid electrolyte interfaces for photoelectron spectroscopy

Residual Stress Development in Lattice Mismatched Epitaxial Thin Films via Atomic and Molecular Layer Depositions

Uneven deposition on the Al electrode under tension strain

Dynamic Al–O Interactions Enable Uniform Al Deposition Toward High Energy-Density and Practical Al Metal Batteries

Atomic and Molecular Layer Deposition as Surface Engineering Techniques for Emerging Alkali Metal Rechargeable Batteries

On the Hidden Transient Interphase in Metal Anodes: Dynamic Precipitation Controls Electrochemical Interfaces in Batteries

In Situ Monitoring of Lithium Metal Anodes and Their Solid Electrolyte Interphases by Transmission Electron Microscopy

Regulating electrodeposition morphology in high-capacity aluminium and zinc battery anodes using interfacial metal–substrate bonding

From Nano‐Alloy to Nano‐Laminated Interfaces for Highly Stable Alkali Metal Anodes

Observing the structural diversity of electrochemically deposited lithium metal in three dimensions

Elucidating Solid Electrolyte Interphase Formation in Sodium-Based Batteries: Key Reductive Reactions and Inorganic Composition

Tunable structure and dynamics of solid electrolyte interphase at lithium metal anode

In situ formation of liquid crystal interphase in electrolytes with soft templating effects for aqueous dual-electrode-free batteries

Investigating and Optimizing Interfacial Properties of Electrode Materials for Lithium-ion and Sodium-ion Batteries

Mass Transfer Limitation within Molecular Crowding Electrolyte Reorienting (100) and (101) Texture for Dendrite‐Free Zinc Metal Batteries

In Situ Atomic-Scale Observation of Electrochemical Delithiation Induced Structure Evolution of Licoo2 Cathode in A Working All-Solid-State Battery