The Effect of Mineral Dissolution on the Effective Stress Law for Permeability in a Tight Sandstone
Jin Ma,Lorenzo Querci,Bodo Hattendorf,Martin O. Saar,Xiang‐Zhao Kong
DOI: https://doi.org/10.1029/2020gl088346
IF: 5.2
2020-07-24
Geophysical Research Letters
Abstract:We present flow‐through experiments to delineate the processes involved in permeability changes driven by effective stress variations and mineral cement dissolution in porous rocks. CO2‐enriched brine is injected continuously into a tight sandstone under in situ reservoir conditions for 455 hrs. Due to the dolomite cement dissolution, the bulk permeability of the sandstone specimen significantly increases, and two dissolution passages are identified near the fluid inlet by X‐ray CT imaging. Prereaction and postreaction examinations of the effective stress law for permeability suggest that after reaction, the bulk permeability is more sensitive to pore pressure changes and less sensitive to effective stress changes. These observations are corroborated by Scanning Electron Microscopy and X‐ray CT observations. This study deepens our understanding of the effect of mineral dissolution on the effective stress law for permeability, with implications for characterizing subsurface mass and energy transport, particularly during fluid injection/production into/from geologic reservoirs. The effective stress law for permeability describes the pore pressure‐effective stress‐permeability relationships and constitutes an essential law in poroelasticity theory. These relationships may change due to chemical fluid‐mineral reactions that modify the geometry of the fluid flow paths. In this work, we conduct laboratory experiments to investigate the evolution of the effective stress law for permeability in a tight sandstone specimen after acid stimulation. Two dissolution passages, formed due to carbonate mineral dissolution, are identified near the injection inlet by X‐ray CT imaging. These passages significantly increase the postreaction specimen permeability and lower the permeability sensitivity to effective stresses. The dissolution of carbonate minerals further exposes previously covered clay minerals to the pore fluid, resulting in a higher sensitivity of pore fluid pressure changes to the bulk permeability. These results are particularly important for geological operations involving fluid injection or production, such as Carbon Capture (Utilization) and Storage (CC(U)S), fluid production, and injection in geothermal systems, oil/gas production, and gas storage. During dolomite dissolution, the specimen's bulk permeability is enhanced, due to the formation of two dissolution passages Permeability is more sensitive to the pore pressure after dolomite dissolution, likely due to the increasing exposure of clay minerals Permeability is less sensitive to the effective stress after reaction, due to high resistance to pore closure in the dissolution passages
geosciences, multidisciplinary