Abstract:Coral sand particles exhibit a wide range of shapes, which can be divided into four shapes, e.g., blocky, dendritic and rodlike, flaky, and shell debris. The particle shape of these mixtures is defined by the sphericity, concavity, aspect ratio, flatness and overall regularity, which ranges from 0 to 1. The effect of particle shape on the strength, crushing characteristics, and critical state parameter is systematically investigated through a series of triaxial drainage shear tests under different confining pressures. And the relationship between critical state parameters and mechanical parameters is established. The test results demonstrate the existence of an evident strain-hardening phenomenon in the stress-strain curve of coral sand, accompanied by a strain-softening phenomenon when the bias stress reaches its peak value. The sample is initially subjected to shear shrinkage, followed by shear expansion. The volumetric deformation of the coral sand decreased with increasing peripheral pressure. The particles are transformed from rough irregular shapes to smooth spheres as evidenced by an increase in the shape parameter. The greater the degree of irregularity in the shape of the particles, the more pronounced the resulting change in size reduction. In addition, the critical state parameter was found to be influenced by the shape of the coral sand particles and the mode of particle accumulation. The overall shear resistance of coral sand particles was found to depend on particle rearrangement in addition to particle surface roughness and interparticle friction. It is proposed that the general regularity critical state parameter equation relates the particle shape of coral sand to its critical state mechanical properties, which is of great importance to the practical application and research of coral sand in engineering, and provides an effective means of predicting mechanical properties granular materials.

Dynamic mechanical behaviors of coral sand under drop weight impact

Dynamic mechanical behavior of different coral sand subjected to impact loading

Compressibility and crushing of coral sands under one-dimensional dynamic compaction

Effects of Size and Shape on the Crushing Strength of Coral Sand Particles under Diametral Compression Test

Simulation Study of Breakage in Coral Sand Particles under Dynamic Confined Compression

Effect of particle size on the failure behavior of cemented coral sand under impact loading

Effect of particle size distribution on dynamic properties of cemented coral sand under SHPB impact loading

Micro-and macro-mechanical behavior of crushable calcareous sand in South China Sea

Dynamic Characteristics of Coral Sand in the Condition of Particle Breakage

Experimental Study on the Impact of Water Content on the Strength Parameters of Coral Gravelly Sand

Damage of Sandstone Induced by Repetitive Impact Loading

Axial Deformation Behavior of Precompressed Coral Sand under Repeated Impacts

Dynamic mechanical response and particle breakage characteristics of calcareous sand

Study on the particle breakage of coral sand in the ring shear experiment

Experimental Study on the Mechanical Strength, Deformation Behavior and Infiltration Characteristics of Coral Sand

Experimental study on the mechanical behaviors and particle breakage characteristics of calcareous sand from South China Sea under repeated one-dimensional impacts

Experimental study of one-dimensional compression creep in crushed dry coral sand

The Strain Rate Effects of Coral Sand at Different Relative Densities and Moisture Contents

Effect of the particle shape on the shear mechanical behavior of coral sand

Effects of fine content on the mechanical properties and breakage behavior of gap-graded coral sand

Fractal Breakage and Particle Shape Analysis for Coral Sand under High-Pressure and One-Dimensional Creep Conditions