Abstract:Ceramic matrix composites (CMCs) on one level are excellent materials for acoustic emission (AE) analysis. They are excellent waveguides for AE waveform transmission due to the high modulus to density ratio. CMC inelastic behavior is due to micro‐ and macrocrack formation from matrix crack interaction with the fibers via a relatively weak fiber/matrix interface which create ideal stress waves. Because of this, AE is an excellent detector of microcracks in general, and most importantly in the case of CMCs, the initial or lowest stress crack formation. This property can be related to long time stressed‐oxidation degradation of nonoxide composites, in particular. In addition, AE has been used to effectively determine the stress distribution for matrix cracks which cause the nonlinear stress–strain behavior. However, a key to quantitatively correlating AE with sources is first and foremost to locate where the AE originated. For a tensile test, most AE comes from the near‐grip region and the radius region outside the gage area of interest. Outside the gage region AE would not be considered useful data pertaining to stress/strain behavior and must be sorted out from the AE dataset. Location is determined by the difference in time of arrivals (TOAs) of waveforms received on each sensor from a given AE source. Automated TOA techniques such as threshold voltage crossing or Akaike information criteria (AIC) have limitations in overall accuracy of differences in TOA (Δt) of two different sensors required for location analysis. This study has incorporated several signal filter and enhancement techniques and an approach toward increasing the accuracy of the classic TOA techniques. First TOA was determined for the two sensors of the AE tests "manually" based on first extensional peak of the waveform, this served as the "exact" difference in TOA. Δt's were then determined for the various filter/TOA techniques and compared to those from the manual determined Δt. The best filter/TOA techniques resulted in more than two times better accuracy (defined as percentage of events within 0.1 μs of the exact Δt) than the conventional threshold crossing or AIC technique.

Acoustic emission and nondestructive evaluation of biomaterials and tissues

Acoustic emission monitoring in geotechnical element tests

The research of acoustic emission techniques for non destructive testing and health monitoring on civil engineering structures

AE health monitoring technique for composite wind turbine blade: a state-of-art review

AE feature extraction and signal representation model based on wavelet packet decomposition

Acoustic Emission in Ceramic Matrix Composites

Acoustoelastic Guided and Surface Waves in Waveguides with Focus on Non-Destructive Testing and Structural Health Monitoring Applications —A Review of Recent Studies

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

Electromechanical Impedance of Acoustic Emission Sensors used for Self-Diagnosis

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Acoustic emission accuracy from a tensile test of a ceramic matrix composite

The sound of orthopaedic surgery--the application of acoustic emission technology in orthopaedic surgery: a review

Detection of defects during laser-powder interaction by acoustic emission sensors and signal characteristics

An Acoustic Emission Activity Detection Method based on Short-Term Waveform Features: Application to Metallic Components under Uniaxial Tensile Test

A study on the efficacy of modal acoustic emission technique for health monitoring of structures with different geometries

Hearing the Unheard: Fundamentals of Acoustic Emission Signals as Predictors of Total Hip Arthroplasty Implant Loosening

The Nature of Acoustic Emission during Deformation Processes in Metallic Materials

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Fundamental and assessment of concrete structure monitoring by using acoustic emission technique testing: A review

Otoacoustic Emission and Its Application in Anesthesia.

Damage Mode Identification and Singular Signal Detection of Composite Wind Turbine Blade Using Acoustic Emission