Abstract:Geopolymers are prepared by alkali solution-activated natural minerals or industrial waste materials, which have been widely used as new sustainable building and construction materials for their excellent thermal and mechanical properties. The thermal and mechanical properties of geopolymers at high temperature have attracted great attention from many researchers. However, there are few systematic works concerning these two issues. Therefore, this work reviewed the thermal and mechanical behaviors of geopolymers at high temperature. Firstly, the thermal properties of geopolymers in terms of mass loss, thermal expansion, and thermal conductivity after high temperature were explained. Secondly, the mechanical properties of residual compressive strength and stress-strain relationship of fly ash geopolymers and metakaolin geopolymers after high temperature were analyzed. Finally, the microstructure and mineralogical characteristics of geopolymers upon heating were interpreted according to the changes of microstructures and compositions. The results show that the thermal properties of geopolymers are superior to cement concrete. The geopolymers possess few mass loss and a low expansion ratio and thermal conductivity at high temperature. The thermal and mechanical properties of the geopolymers are usually closely related to the raw materials and the constituents of the geopolymers. Preparation and testing conditions can affect the mechanical properties of the geopolymers. The stress-strain curves of geopolymer are changed by the composition of geopolymers and the high temperature. The silicon-type fillers not only improve the thermal expansion of the geopolymers but also enhance mechanical properties of the geopolymers. But, they do not contribute to reducing the thermal conductivity. the different raw materials, aluminosilicate precursor and reinforcement materials, result in different geopolymer damage during the heating. However, phase transitions can occur during the process of heating regardless of the raw materials. The additional performance enhancements can be achieved by optimizing the paste formulation, adjusting the inner structure, changing the alkali type, and incorporating reinforcements.

Study on the mechanical and thermal properties of one-part geopolymer composite for high performance in energy piles

Development of geopolymer-based composites for geothermal energy applications

Performance Characteristics of Micro Fiber-Reinforced Ambient Cured One-Part Geopolymer Mortar for Repairing

Thermal and Mechanical Properties of Geopolymers Exposed to High Temperature: A Literature Review

Microstructure and Compressive Properties of Silicon Carbide Reinforced Geopolymer

Study the Mechanical Properties of Geopolymer under Different Curing Conditions

Latest Progress of Mechanical Properties of Geopolymer Concrete at Elevated Temperature

Achieving Superior High-Strength Geopolymer Via the Synergistic Effect of Traditional Oven Curing and Microwave Curing

Optimizing Toughness and Cost-Effectiveness in One-Part Geopolymers Via Fiber Reinforcement: A Comprehensive Investigation of PVA, PE, and Glass Fibers

Cleaner geopolymer prepared by co-activation of gasification coal fly ash and steel slag: durability properties and economic assessment

Compressive and Flexural Properties of Ultra-Fine Coal Gangue-Based Geopolymer Gels and Microscopic Mechanism Analysis

A sludge and modified rice husk ash-based geopolymer: synthesis and characterization analysis

Matrix Wettability and Mechanical Properties of Geopolymer Cement-Polydimethylsiloxane (PDMS) Hybrids

Synthesis and Characterization of Red Mud and Rice Husk Ash-Based Geopolymer Composites

Influence of liquid-to-solid ratios on properties and microstructure of coal gasification slag-based one-part geopolymer

Review of Research on High-Temperature Behavior of Geopolymer Paste

Effect of high temperature heating on the microstructure and performance of cesium-based geopolymer reinforced by cordierite

Mechanical and Microstructural Properties of Polypropylene Fiber-Reinforced Geopolymer Composites

Mechanical and electrothermal properties of lightweight graphite/geopolymer composites

Development of a high-strength lightweight geopolymer concrete for structural and thermal insulation applications