Abstract:The slow cook-off test is widely used for analyzing the safety of propellants under accidental thermal stimulation. To examine the influence of the pre-ignition technology of a composite propellant on thermal safety and combustion characteristics, a quantitative evaluation experiment of slow cook-off reaction intensity of a typical composite propellant charge was designed and executed, considering hydroxyl-terminated polybutadiene (HTPB) and hydroxyl‐terminated block copolyether (HTPE) propellants containing ammonium perchlorate (AP) and aluminum (Al). The experimental method for quantitative evaluation of the slow cook-off reaction intensity is highly essential to investigate the safety of ammunition. The influence of pre-ignition on reaction intensity was analyzed at different temperatures, the combustion behavior of the heated propellant was studied using a closed bomb experiment, and the influence of pre-ignition on combustion evolution was analyzed. Finally, the process was characterized by theoretical modeling. The results show that the slider speed was 169.3 m/s when the HTPB/AP/Al propellant was ignited at 234 °C. The slider speed was reduced to 43.4 m/s and 61.8 m/s by pre-ignition at 120 °C and 214 °C, respectively. When the spontaneous ignition temperature of HTPE/AP/Al propellant was 212 °C, the slider speed was 110.5 m/s. Pre-ignition at 120 °C and 192 °C reduced the slider speed to 39.4 m/s and 43.7 m/s, respectively. Pre-ignition can effectively reduce the reaction intensity. Under the same conditions, the reaction strength of HTPE/AP/Al propellant is marginally lower than that of HTPB/AP/Al propellant. In the slow heating process before ignition, with the increase in ignition temperature, when HTPB/AP/Al propellant was pre-ignition at 120 °C and 214 °C, the pressurization time was 9.8 ms and 6.4 ms, respectively, while before ignition, the pressurization time decreased to 5.5 ms. At 120 °C and 192 °C, the pressurization time of HTPE/AP/Al propellant was 50.9 ms and 36.6 ms, respectively, while before ignition, the pressurization time decreased to 26.9 ms. The reduction in ignition temperature decreased the pressure growth rate of propellant during combustion and reduced the pressurization time. A calculation model of the propellant combustion process was established to characterize the growth process of the combustion pressure at different ignition temperatures. This model can effectively predict the combustion evolution of composite propellants after the slow cook-off ignition and aid in ensuring propellant safety.

Cook-off Characteristics of Solid Rocket Motor with AP/HTPE Propellant Charge

Assessing the thermal safety of solid propellant charges based on slow cook-off tests and numerical simulations

Experimental Research on Electron Density in Solid-Rocket Motor Plume

Influence of pre-ignition technology on combustion and explosion characteristics of composite propellants

Numerical Modeling and Studies of Ignition Transients in End-Burning-Grain Solid Rocket Motors

Evaluation of Mixing Effect on Coupled Heat Release and Transfer Performance of a Novel Segregated Solid Rocket Motor

AP/HTPB combustion response simulation with a new equivalent linear system method

A model for the combustion behavior of AP/HTPB propellant containing ultrafine aluminum

Numerical analysis on combustion instabilities in end-burning-grain solid rocket motors utilizing pressure-coupled response functions

Numerical simulation of the effect of multiple factors on the ignition process of a solid rocket motor

Preliminary experimental study on combustion characteristics in a solid rocket motor nozzle based on the TDLAS system

Modeling and Analysis of Triggering Pulse to Thermoacoustic Instability in an End-Burning-grain Model Solid Rocket Motor

Effects of module number and firing condition on charge thermal safety in gun chamber

Study on heat transfer model of solid rocket motor combustor under high-temperature two-phase flow scour state

Test Design and Theoretical Calculation of Cook-off Characteristics and Thermal Safety Venting Area of RBOE Charge

Combustion performance and scale effect from N 2 O/HTPB hybrid rocket motor simulations

Stochastic Equilibrium Analysis to Optimize Solid Propellant Combustion Gas Composition

The Confirmation of Thermal Boundary Parameters in an Oxygen Kerosene Fuel-Rich Rocket Engine

Comparison Of Solid Rocket Motor Thrust Modulation Technique

Investigation of thermomechanical properties of solid rocket propellant used in multi-barrel rocket systems

Condensed Combustion Products Characteristics of HTPB/AP/Al Propellants under Solid Rocket Motor Conditions