Abstract:Hydrogenation of CO2 into liquid hydrocarbons is an attractive route for chemical utilization of CO2, but suffers from limited product selectivity. By controlling the exposed surface atoms of metal catalyst, purposefully enhancing the reaction rate of bottleneck steps for CO2 activation and C-C coupling is expected to solve this problem. Here, we tuned the exposed surface atoms of catalysts separately and simultaneously by facet control, doping and promoter modification; a nanosheet-shaped Fe2O3 rich in oxygen vacancies was first constructed to enhance the adsorption and activation of CO2. Cu doping and K promoter were further used to promote the formation of active χ-Fe5C2 phase and facilitate the coupling of C-C bond to form long chain fuels. The optimized K-promoted and Cu-doped Fe2O3 nanosheets (3 K/6Cu-Fe-S) exhibited high CO2 conversion (46.5%) and C5+ hydrocarbons selectivity (53.6%), accompanied with low CO (5.3%) and CH4 selectivity (12.2%) at 300 °C, outperforming other reported Fe-based catalysts significantly. Meanwhile, a 205 h on stream test indicated the excellent stability of 3 K/6Cu-Fe-S. The effects of each tuning method on catalytic activity and product selectivity were further studied by combining the change of the phase and surface electronic structure of the catalyst before and after the reaction. Cu doping and K promoter were verified to have a synergistic enhancement effect on the hydrogenation performance of CO2, rather than just the sum of the two. These findings would be beneficial for the rational design of CO2 hydrogenation catalysts.

A versatile hybrid catalyst platform of Na/ZnFe2O4 and zeolite for selective hydrocarbon production from CO2 hydrogenation

Selective Light Hydrocarbon Production from CO 2 Hydrogenation over Na/ZnFe 2 O 4 and CHA-Zeolite Hybrid Catalysts

Bifunctional Catalysts Composed of Low Silicon‐content SAPO‐34 Nanosheets and in 2 O 3 /zro 2 with Improved Performance for CO 2 Hydrogenation

Boosting liquid hydrocarbons selectivity from CO2 hydrogenation by facilely tailoring surface acid properties of zeolite via a modified Fischer-Tropsch synthesis

Highly Active and Stable Catalysts Derived from Bimetal-ZIFs for Selective CO 2 Hydrogenation to Valuable Hydrocarbons

New Insights for High-Throughput CO2 Hydrogenation to High-Quality Fuel

Highly Active and Stable Catalysts Derived from Bimetal-ZIFs for Selective CO2 Hydrogenation to Valuable Hydrocarbons

Directly converting CO2 into a gasoline fuel

Synthesis of Liquid Hydrocarbon via Direct Hydrogenation of CO2 over FeCu-Based Bifunctional Catalyst Derived from Layered Double Hydroxides

Direct conversion of CO2 into liquid fuels with high selectivity over a bifunctional catalyst

Zeolite-confined Fe-site Catalysts for the Hydrogenation of CO2 to Produce High-value Chemicals

Indium-Promoted ZnZrO x /nano-ZSM-5 for Efficient Conversion of CO 2 to Aromatics with High Selectivity

Selective CO 2 hydrogenation to liquid fuels over Na-decorated FeMgMnOx catalyst with high carbon efficiency

Facet-Controlled Cu-doped and K-promoted Fe2O3 nanosheets for efficient CO2 hydrogenation to liquid hydrocarbons

Hydrogenation of CO2 to Light Olefins over ZnZrOx/SSZ‐13

Selective CO2 Hydrogenation over Zeolite-Based Catalysts for Targeted High Value Product

Selective synthesis of olefins via CO 2 hydrogenation over transition-metal-doped iron-based catalysts

Sodium Promoted FeZn@SiO2-C Catalysts for Sustainable Production of Low Olefins by CO2 Hydrogenation

Bifunctional CoFe/HZSM-5 Catalysts Orient CO2 Hydrogenation to Liquid Hydrocarbons

Carbon Dioxide Hydrogenation to Light Olefins over ZnO-Y2O3 and SAPO-34 Bifunctional Catalysts

Selectivity descriptors for the direct hydrogenation of CO2 to hydrocarbons during zeolite-mediated bifunctional catalysis